lights By scootdode (Read 476 times)

[scootdode]

Have 11pole stator one wire not being used can I add a regulator and get the dc voltage i need to run the lights I am adding.

[jct842]

on what?

[Bashan]

Are you talking about the R/R? Which R/R is it and what wire? What lights? Rich

[scootdode]

Light of a retro scooter big chrome light 1 bulb putting it on my pst150c icebear trike for more light have the x wire from stator but puts out ac voltage would like to have it run that light and any that may add later

[scootdode]

Is there a way to put a regular on for that wire on the stator to get the dc voltage I would need to run the lights that are added

[Bashan]

The idea of an 11 coil stator is that you can go primarily DC throughout the system. At least the one I did was like that. Run a red off of the positive terminal to a fuse panel and run your circuits off of it. Then just ground your circuits back to the frame or right to the battery. It should be able to handle whatever lights you want to put on it. Or just run a circuit right off of the battery with a switch and a fuse. I can help you with either of those scenarios but I'll need some specifics on the lights you're supplying. Any supply wire right off of the stator is AC and unregulated. You cannot use them for lighting circuits. I don't know what the "X" wire is. Rich

[Alleyoop]

Oct 23, 2014 20:16:49 GMT -6 scootdode said:

Light of a retro scooter big chrome light 1 bulb putting it on my pst150c icebear trike for more light have the x wire from stator but puts out ac voltage would like to have it run that light and any that may add later

Hey Bud do you have a 2009 PST150H Trike? I have one bought when Ice Bear First Imported them into the states.
Put a picture of yours up mine is in my sig.
Alleyoop

[scootdode]

2014 pst150-c hay was able to run the wire from stator to a 2nd regulator got the 12volts out light is working good put a dimmer switch on it to.

[Alleyoop]

Ah yes the CYCLONE www.icebearatv.com/product/pst150c
Alleyoop

[scootdode]

Will is if daughter know how to do pictures

[Alleyoop]

HERE IS HOW TO POST PICTURES USING THIS HOST. IT IS EASY AND FREE:

1. Click on this link:
tinypic.com/index.php

2. Click on Browse, that will link to your computer.
3. Find what you want to load.
3. Click on the name of the picture
4. Click on OPEN
5. Click on UPLOAD
6. Click on the LINK that starts with IMG.
7. RIGHT CLICK and CLICK on COPY
8. THEN Come here to your THREAD ON DOC.
9. RIGHT CLICK and CLICK ON PASTE.
Alleyoop

[scootdode]

Used light tonight and worked well am very happy i can see woho