Clinician
Currently Offline
Posts: 25 
Likes: 2
Joined: Apr 21, 2015 21:44:06 GMT -6
|
Post by jojo on May 15, 2015 7:49:06 GMT -6
Just a quick and to some stupid question the wiring harnesses for these scooters is typically a 16 gauge??? And the battery terminals Im guessing 10 gauge? Thanks for the help
|
|
|
|
Post by cyborg on May 15, 2015 7:54:59 GMT -6
that sounds about right to me ,,,probably 8 for the battery wires,,,,,Alley will chime in here i'm sure
|
|
Clinician
Currently Offline
Posts: 25
Likes: 2
Joined: Apr 21, 2015 21:44:06 GMT -6
|
Post by jojo on May 15, 2015 8:10:32 GMT -6
cyborg I havent been on this forum long now,as I only recently obtained a dismantled disaster scooter for free from a friend and Im starting to think Alley may not like me he hasnt chimed in on any of my posts yet 
|
|
Doc's Anything Goes
Currently Offline
Posts: 270
Likes: 32
Joined: Nov 10, 2014 10:58:09 GMT -6
|
Post by dmartin95 on May 15, 2015 9:26:25 GMT -6
Stock wire gauge is ridiculously small.... I have found 22 gauge on my stator circuit (main charging wires to R/R)
I have found that AWG 18 is good for everything except:
your starter and battery hots... Your frame and engine ground should get 14~12 AWG...
16 AWG is usable and will actually be better, but, it's harder to work with, won't fit stock plugs and more costly.
|
|
