|
|
Post by Alleyoop on Apr 30, 2016 21:07:08 GMT -6
Well if it needs to cool down before it will start again that is a CLASSIC CASE of the valves being tight and the motor is loosing compression. I thought you had adjusted the valves on this thing?
|
|
|
|
Post by olivertwisted on Apr 30, 2016 21:10:02 GMT -6
I DID! It was the first thing that I did because, that is what I had thought it would be.
|
|
|
|
Post by olivertwisted on Apr 30, 2016 21:12:07 GMT -6
I'm worried that the battery may be running down so, I'll plug her in, do the BOG test tomorrow and load it up. Can't run it too much on the patio but, thats where I need to plug it in.
|
|
|
|
Post by Alleyoop on Apr 30, 2016 21:15:14 GMT -6
Okey then it may be the CDI getting hot and pucking out if the valves are ok.
Lets hope its the CDI that is causing it to cut out and die.
Will check in tomorrow.
Alleyoop
|
|
|
|
Post by olivertwisted on Apr 30, 2016 21:17:39 GMT -6
Okay, thanks again, fellas!
|
|
|
|
Post by cyborg on May 1, 2016 9:15:38 GMT -6
Did you completely disassemble the carb at one time? Check the diaphragm for tears and pinholes,,,also check the slide bottom to see if the pressure vent hole is clogged,,,it'll be right next to where the jet needle comes out
|
|
|
|
Post by olivertwisted on May 1, 2016 14:06:55 GMT -6
cyborg, yes , I just disassembled and thoroughly cleaned the carb. I inspected both diaphrams and got a flashlight under them to confirm they were ok. I shot carb cleaner through every opening pretty thoroughly. If you are thinking about that uneven idle, it was corrected via the A/F screw.  The CDI didn't arrive today, according to the tracking # but, can't check the mailbox just yet. I'll be checking for "Bogging down" as soon as I can today.
|
|
|
|
Post by Alleyoop on May 1, 2016 14:12:29 GMT -6
Great that the bouncing idle was due to the fuel ratio was it LEAN did you richen the mixture? Now test it for bogging and how it take throttle, give the throttle a few quick full twists and let go. The RPMS should rise quickly and come down quickly to the idle you set. So you should get VROOOM VROOM nice and quick and smooth. If it hangs a little coming down it is LEAN. If it comes down to idle and then wants to drop more and die it is just a hair to rich. ALL TRICKs OF THE TRADE |
|
|
|
Post by olivertwisted on May 1, 2016 14:29:02 GMT -6
Okie doke! Good info. I'll report it back. Actually, it was a bit rich (Turned outward too far) if I'm remembering .
Somebody forgot to tell me that it is Sunday, lol! No mail....
|
|
|
|
Post by Alleyoop on May 1, 2016 14:34:08 GMT -6
I was going to mention that it was SUNDAY BUT I kept my mouth shut because another guy said the same thing on here couple days ago and I OPENED my mouth but in MASS they deliver on Sunday??? So I had egg on my face and I have already enough eggs and do not need any more  |
|
|
|
Post by olivertwisted on May 1, 2016 15:11:39 GMT -6
LOL! They'd better stop bullyin' the help ! LOL!!!
|
|
|
|
Post by Alleyoop on May 1, 2016 15:37:51 GMT -6
You tell them especially when I only get A BUCK THREE EIGHTY AN HOUR!! What's with that?  |
|
|
|
Post by olivertwisted on May 1, 2016 15:46:33 GMT -6
Haha! Alllll RIGHTY thennnn ! Now that we've set em strait.... I'm almost feelin' fearsome. Like a noisy chihuahua , challenging a threat but staying close to, and runnin around the legs of the big guy, lolol!  |
|
|
|
Post by Alleyoop on May 1, 2016 15:52:57 GMT -6
HAHAHAHAHA, just having some fun we cannot take this Chinese stuff seriously, just fix them up as best as we can and try to enjoy riding with the wind in your face and not be constantly wrenching which takes the fun out of it.  |
|
|
|
Post by olivertwisted on May 1, 2016 15:59:29 GMT -6
I'll say !!! And hopefully, SOON! |
|
..BAD TO THE BONE..
