Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Nov 2, 2016 8:00:28 GMT -6
So i have a powermax 150 and my turn signals stopped working this morning , still have tail and brake light and headlight and running light, horn works too. Bike starts with starter no problem
|
|
|
Post by crwford on Nov 2, 2016 10:40:19 GMT -6
sounds like a signal flasher went bad or came unpluged
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Nov 2, 2016 11:01:28 GMT -6
Will a universal work for stock turn signals or do i need oem part
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Nov 2, 2016 17:48:07 GMT -6
Time to get out the meter and find out for sure what the problem is. Generic diagrams in library. Bad connections are more common than failure. meter can tell you if voltage is getting to the flasher.
People keep wanting to replace parts instead of finding the problem. If we learn to trouble shoot when a really bad problem comes along it won't be a problem.
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Nov 2, 2016 18:22:15 GMT -6
Its getting power, 12v with signal switch in either position, showed like 14 in neutral (off) position, checked every connection on the harness all good, thats y i asked about the part. To see if a universal would work
|
|
|
Post by crwford on Nov 2, 2016 19:31:51 GMT -6
I have had good luck with the universal if that was the Question.
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Nov 2, 2016 19:40:43 GMT -6
I have had good luck with the universal if that was the Question. With the stock turn signals?
|
|
|
Post by cyborg on Nov 3, 2016 7:23:26 GMT -6
If the plug for the original is the same I don't see why it won't work
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Nov 4, 2016 18:09:32 GMT -6
Ok so i hooked up the universal, and the blinkers just stay solid on
|
|
|
Post by crwford on Nov 4, 2016 21:00:24 GMT -6
The ones I got was flasher with plug and 3 wires and then you find out what wire work were that is the only one's that I buy nothing else.
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Nov 4, 2016 21:19:55 GMT -6
|
|
|
Post by cyborg on Nov 5, 2016 7:24:18 GMT -6
Are all the bulbs good?,,,even so there's not enough load to make the flasher cycle,,,I use digitalis myself,,couple bucks more but they cycle whatever the load is
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Nov 5, 2016 12:56:58 GMT -6
Bulbs are all fine, just stayin solid with this relay,
|
|
Certified Clinician
Currently Offline
Posts: 75
Likes: 1
Joined: Nov 12, 2015 19:06:10 GMT -6
|
Post by dozer187 on Nov 6, 2016 15:03:10 GMT -6
Are all the bulbs good?,,,even so there's not enough load to make the flasher cycle,,,I use digitalis myself,,couple bucks more but they cycle whatever the load is where did u get the digitalis
|
|
|
Post by cyborg on Nov 6, 2016 16:14:13 GMT -6
Got a few of them on eBay,,, switched all my bikes to them
|
|