Senior Clinician
Currently Offline
Posts: 101
Likes: 0
Joined: Oct 30, 2010 14:43:37 GMT -6
|
Post by thetucks on Dec 4, 2010 9:09:59 GMT -6
how do i check it?
|
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Dec 5, 2010 16:52:42 GMT -6
I agree check the wiring to the enricher, where it connects to the harness. It is usually a red plug. Check inside there are two copper tabs. These are crap and very thin and often get bent, so the connection is intermittent. Very hard to diagnose.
If the pins are good and you have power to the plug, remove the enricher from the carb and hook it straight to a fresh battery. There is a brass pin in these and it should extend about 1/4 to 3/8 of an inch in about 3-4 minutes. If it doesn't move or fully extend , replace the enricher. They are like $15.
You can see what it should look like here in fast motion, called Gy6 automatic bystarter
|
|
