belt size By tvnacman (Read 1,202 times)

[tvnacman]

so I'm thinking its time to inspect the cvt , I have not been in there yet . It is LB1P57QMJ with 16" wheels .

it is the longbo Prodgy

anyone know what the belt size is.

I was thinking of changing the belt and keep the one that is in there as a spare . Remove the clutch check and grease the bearings . I was looking to remove the variator check the rollers weigh them clean and lube . I just wanted to get a jump on it .

[sprocket]

Probably a 842-20-30, but check it before you order...I think kevlar belts suck...

Bando and Gates are the same now...

Be really careful how much grease you use and where you put it. Get ANY on the drive pulleys etc you will be going nowhere fast...

Don't lube anything on the variator.. they are designed to work dry. They have the weight stamped on them

Spend some time and do some research

[tvnacman]

no lube on the shaft the varitor slides on to move in and out , not even a little .

[runningslow]

Since you have 16" wheels, it mostly like WILL NOT be the 842-20-30, since that's the for the long case GY6 with 12-13" wheels.

If the belt hasn't shredded, yet and you're just inspecting it, it will probably still have the size printed on it. Just pop off the CVT cover and look.

[sprocket]

I agree with runningslow. Sorry... I missed the 16" wheel thing...

Probabaly 906-22.5-30 drive belt. Scroll to bottom
www.scrappydogscooters.com/GY6B_16__wheel_BN157QMJ.html

[sprocket]

These engines are very hard to find parts for. Replacement engine are non-existant

These guys sometimes have parts:

www.absolutelyscooters.net/
www.scrappydogscooters.com/GY6-B_16__wheel_BN157QMJ.html

[tvnacman]

and the correct size is 906-22.5

[tvnacman]

I have a scale I use to weigh in freon charge it weighs in grams , they were all 12gr