244 coolant flow qeestion. By jhbietz (Read 519 times)

[jhbietz]

I getting ready to run the hoses on my cooling system and I'm not sure on the direction of flow. Dose the water go in at the pump housing or come out?

Thank you,
Jim

[bobf]

I was just working on my 244 Honda clone and by memory the hoses went this way.

From the water pump to front of radiator and across to the lower opening.

From the radiator fill on top, down to the bottom, then forward to beyond the radiator front, the up and into the upper opening. Also from the the radiator fill opening there was a smaller line that went forward to the overflow bottle under the floor mat. I forget how that was connected.

I hope this is helpful.
.

[Cruiser]

Water goes in at the pump. Here's a diagram of the Helix which uses the same engine:

mpsracing.net/helix-manual/12-00.html

[jhbietz]

Thank you both! That answers my question. .