Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Jun 18, 2011 4:55:46 GMT -6
|
Post by kaka20 on Jun 20, 2011 2:06:55 GMT -6
|
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Jun 18, 2011 4:55:46 GMT -6
|
Post by kaka20 on Jun 20, 2011 2:07:58 GMT -6
pic Attachments:
|
|
|
Post by Bashan on Jun 20, 2011 9:25:45 GMT -6
Trike manuals are hard to come by, they just haven't made their way through the pipeline yet. I think that oil cooled GY6 engine is the same one they put in the BMS Pathfinder and the Matrix scooters. If you could explain a little about what is wrong with your trike I'm sure somebody can help you. Also, I'm going to move this to the trike section. Rich
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 1
Joined: May 7, 2011 16:24:58 GMT -6
|
Post by skytex on Jun 20, 2011 12:32:21 GMT -6
That thing looks alot like the compeller unless I'm too exhausted to see straight. It might atleast offer another source for info.
|
|
|
Post by Alleyoop on Jun 20, 2011 12:41:44 GMT -6
Kaka20, What seems to be the problem? If you could explain what is happening I and others may be able to help. I have an ICE BEAR PST150H Trike and know it backwards and forward. Some other have the 150-11 which looks almost like yours and others have the new 300ccs as well. Look on the side and get the Engine Type they are usually stamped on the Case. It is probably a CY6 150 bored out. Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 1,319
Likes: 5
Joined: Feb 17, 2011 19:36:47 GMT -6
|
Post by mike6736 on Jun 20, 2011 13:56:25 GMT -6
Looks like a Magnum early version....I saw one in Georgia with a 200cc... it was a 2009 and the guy said he always had issues with it.
Mike
|
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Jun 18, 2011 4:55:46 GMT -6
|
Post by kaka20 on Jun 20, 2011 23:27:51 GMT -6
the ignition key does not goes to lock position. it works fine on ON and OFF and also on opening the seat. but does not moves to lock position so the trike comes in lock position. it is a new scooter. what could be the problem and how to repair it. and also i need full diagram of scooter so could identify which part is located in which position. so get to know my trike Attachments:
|
|
|
Post by Alleyoop on Jun 21, 2011 2:14:00 GMT -6
To lock it you PUSH DOWN on the KEY and TURN it to the LOCK POSITION. Alleyoop
|
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Jun 18, 2011 4:55:46 GMT -6
|
Post by kaka20 on Jun 21, 2011 12:05:30 GMT -6
yes i know, i have done that , push it down and then turn to left but not moving....
|
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Jun 18, 2011 4:55:46 GMT -6
|
Post by kaka20 on Jun 21, 2011 12:07:26 GMT -6
this scooter is similar to Ice Bear PST150-11 / Roketa MC-102 150cc 3-Wheeler Trike if any one have the manual of this scooter then plz share.....
|
|
|
Post by Alleyoop on Jun 21, 2011 13:44:23 GMT -6
Ok, I just tried it on mine, and it will only lock if the handlebars are straight forward. If I turn the wheel in either direction it will not lock. Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 1,319
Likes: 5
Joined: Feb 17, 2011 19:36:47 GMT -6
|
Post by mike6736 on Jun 21, 2011 20:32:14 GMT -6
Mine will only lock in the fulll left position
mike
|
|
|
Post by Alleyoop on Jun 21, 2011 21:27:45 GMT -6
Kaka20, So try locking it in the three positions, Try it Left see if it locks, Try it center see if it Locks and then try it right and see if it locks. If not TURN THE TRIKE UPSIDE DOWN and see if that locks the sucker(HEHE). Lefty, Center, Righty ;D Alleyoop
|
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Jun 18, 2011 4:55:46 GMT -6
|
Post by kaka20 on Jun 25, 2011 2:17:07 GMT -6
tried in every position but does not work
|
|
Clinician
Currently Offline
Posts: 9
Likes: 0
Joined: Jul 29, 2011 19:56:15 GMT -6
|
Post by harleyann1 on Aug 8, 2011 8:05:01 GMT -6
Have you tried to turn the key around...I had to do that on my IceBear Snow Leopard....after the frustration, exasperating, cussi'n stops, turn the key around...:/
|
|