Post by joels007 on Jul 18, 2011 11:50:03 GMT -6
Hi Guys & Gals when I got My 250 jonway I made one short trip and into my shop I went. I had some different sizes of plexiglas
I cut a peace 12 X 12 and rounded the two top corners. It's 6 in. Highter now. Then took two more peaces that were 16 long 1and1/4 wide 1/4 thick to make a brace so the windshield would not bent when you were driving at a higher speed. What I did with those 2 peace was heat one end over my cooking stove just enough to bend it to the same angle as the windshield and the bottom I cut at an angle so I could get closer to the bottom eadge of the windshield. O yes the $1.00 was for bolts and nuts.
You can also buy miss cut peaces of plexiglas at Lows for $1.00 a peace. I got a peace that was 24in. by 12in. for $1.00 also.
I cut a peace 12 X 12 and rounded the two top corners. It's 6 in. Highter now. Then took two more peaces that were 16 long 1and1/4 wide 1/4 thick to make a brace so the windshield would not bent when you were driving at a higher speed. What I did with those 2 peace was heat one end over my cooking stove just enough to bend it to the same angle as the windshield and the bottom I cut at an angle so I could get closer to the bottom eadge of the windshield. O yes the $1.00 was for bolts and nuts.
You can also buy miss cut peaces of plexiglas at Lows for $1.00 a peace. I got a peace that was 24in. by 12in. for $1.00 also.
Attachments:
