My Roketa Cruiser 150cc By beo111 (Read 1,347 times)

[beo111]

Just added a big trunk with wrap around back rest for a passenger.



I replaced the stock lettering MC54-150 with custom lettering I ordered from an internet company



Added the Trail Tech Vapor for engine temp, speedometer, ambient air, and engine rpm's.



Here is the remote controller for the HD Radio.



Here is the Kenwood HD ready radio and the Kenwood HD Tuner under the seat.



Here are the two Kenwood stereo speakers attached to the glove box.



Not shown is I added LED lights to all turn signals, brake, and dash lights. If you'd like to know anything else or see additional pictures, please let me know! Thanks!

[silverfox96]

Just curious? How's that radio holding up, with all the heat that's generated under the seat?

[beo111]

No problem with the radio. Still working after 2 years!

[Alleyoop]

Beo111,
Very Nice good job. How are you feeding power to the radio, and how does it charge when the radio is on. I have a radio that I got as a gift earlier this year and plan to put it in. As you can see my Trike Body is Identical to yours, as a matter of fact the Trike was made from a 250.
Alleyoop

[beo111]

Somehow it does keep the charge, I don't know how! I did buy a Stinger voltmeter which I have mounted on the dash and it will drop from 14.2 to 13.9. I have gone over 30 miles straight with the radio on and no problems!

[Alleyoop]

Beo111,
Thanks bud, very nice setup.
Alleyoop