150cc compared to 50cc By ld9791 (Read 535 times)

[ld9791]

Ok so I previously owned a Taotao 50cc which I enjoyed (thank you members for previous help with it) but it ran into an issue that I haven't been able to solve yet. (different future post maybe)
So I bought a 150cc jmstar, and loveing it. Now my queztion though, and sorry if its a stupid one. Are the design of the motors, carbs, intake etc the same? Meaning, when diagnosing an issue. Check air/fuel mixture, idle screw, adjust valves etc..
Its about time for its break-in change so I'd like to be prepared and it seems there are more makes/models/styles for 150cc. So a swift kick in the right direction would be appreciated.
Thanks again.

[Alleyoop]

Id,
If the 50cc was a 4 stroke SAMEO SAMEO, just smaller motor on the 50. You may have more emission stuff on the 150. Lot of folks just take that stuff off they usually create more problems than what they are supposed to do. But you have everything that a 50 had just maybe bigger.

PLUS you know have MOW-POWER and can hit 50+ without any mods ;D
Alleyoop

[ld9791]

Aight kewl. Now time to fire up google, put my thinking cap on and get to cussing.....I mean umm work.

[sprocket]

Look under GY6, that is the engine on nearly ever chinese scooter for the past 10 years