Jonway 2011 YY250T Headlight Bulbs By vabeachscooter (Read 2,585 times)

[vabeachscooter]

I have a 2011 Jonway YY250T Scooter that has blown one of the headlights. Instead of just replacing the bulb, I want to upgrade to a HID setup. I'm not sure what bulb base I have so I can order the correct part. The part number of the existing bulb is MC-54-250-02-03-01. This link will show the bulb that I currently have and if someone can tell me what type of bulb base to order that would help out a lot. www.roketapartsdept.com/catalog/MC_54_250_ELECTRICAL_PARTS-605-1.html The bulb that I have is in the 3rd row of the picture, 5 parts items down. Also, does anyone know how to take this all apart? I appreciate any help that you can give.

[bhinch]

I installed my HID system almost 2yrs ago and this is what I used. I chose the 5000k H4 9003 bulb base. It is a Bi-Xenon Hi/Lo 35 w system. I purchased mine on Ebay and have loved the great light that it gives. One of the forums has a pictorial of how to install the HID system. You will have to purchase a 3 prong plug from one of the autoparts stores to hookup your system. The front of the scoot must be removed to get to the headlights and install the HID's.

[bhinch]

Make sure you get a kit that has a relay with it. My kit cost about $65.00 and it had the relay..two bulbs....two ballast...some of the kits do not have the relay...on Ebay search for Xenon and it must be a Hi/Lo system for your scoot.....not a difficult mod...I go to work in the early morning hours and the HID's help with the critters...enjoy your ride...

[bhinch]

this forum has the info you need....library...200-300....electrical...HID install...

[Cruiser]

Here's the link which shows the bi-xenon (hi low beam) kit and installation. I also added pictures of my install. The Ebay link is dead, but there are plenty of other vendors still selling.

scooterdoc.proboards.com/index.cgi?board=elec&action=display&thread=3646