Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Feb 3, 2013 21:02:58 GMT -6
Iam installing a 80cc kit to my 50cc tao tao vip and cant find a really good pic on installing my rings in correct order and ring shape..I know the order but wanted a DOUBLE check to make SURE there in correctly.. so asking for a ring install pic thats a sure thing I cannot get them in wrong in any kind of way .. keep in mind I have done this many times on small engines.. but it been awhile thanks .. I had great luck with all of you on this site and this feels great to find people who care and know scooters well  any other tips would also be appreciated on my rebuild.oh its a 4 stroke |
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Feb 3, 2013 21:35:03 GMT -6
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Feb 3, 2013 21:42:56 GMT -6
Stay organized keep all the bolts and parts together take your time, don't forget your locator dowels, oil the mess outta of the piston and jug before you try to compress the rings and slide it over the jug onto the case, put the left circlip in the piston before you fit it on the crank, be careful not rip the base gasket, dont over tighten any bolt they break, change the oil when you do the install and let it run 10-20 minutes on the center stand before you give it throttle, then zoom away smiling.
|
|
Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Feb 4, 2013 11:11:15 GMT -6
thank you very much for your post it really helped me tx again
|
|
any other tips would also be appreciated on my rebuild.oh its a 4 stroke 