Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Feb 6, 2013 8:41:49 GMT -6
Tao Tao 50cc to 80cc BB kit before I finish with this rebuild wondering if I should replace my cam shaft with bigger lobes???my valves are 69mm not 64mm on the valve head ..think stock cam is ok.. but ..wanted to make sure while motor is out.. also I have number 88 high speed jet in now.. carb of course ..will this jet be good for my BB kit ..or what size should I go with on this rebuild.. this site really is one of my top 3 I deal with and the only one for my scoot .. thanks again for ALL the help I get from everyone
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Feb 6, 2013 8:57:42 GMT -6
I have a a9 cam i would get it running with stock cam first, then do the upgrades. Then if problems pop up you can go back to the last thing you did. 88 jet with 47mm piston should be fine.
|
|
Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Feb 6, 2013 9:40:05 GMT -6
Is the A9 cam stock on a 50cc??? Also will this cam will be ok with the 80cc BB kit?? in other words keep stock cam on 50cc to 80cc rebuild..all good right
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Feb 6, 2013 9:50:30 GMT -6
yep the stock cam works fine
|
|
Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Feb 6, 2013 10:34:03 GMT -6
thank you very much
|
|
