Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on May 7, 2013 12:46:48 GMT -6
First my scoot is running great the only concerns I have is when I'm at stop light my scoot is surging forward like the clutch is not letting go Some time ago I did replace the contra spring in my clutch, recently sand papered the clutch pads, what would cause this? maybe the little clutch springs going bad or does my clutch need a good maintenance like taken apart and geased and if so what kind of gease is good
|
|
|
Post by Bashan on May 7, 2013 16:58:45 GMT -6
My guess would be one of the clutch pad tensioner springs. If one of them breaks then that pad drags and the bike creeps. So yeah, time for a maintenance check for the clutch.
|
|
Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on May 7, 2013 17:34:48 GMT -6
Thanks Bashan That's what I thought (when I sanded them about 2 weeks ago I didn't notice any broke, I check it out) not sure which springs to get, probably the low rpm's? (I think they are black)
|
|
|
Post by Cruiser on May 7, 2013 18:38:01 GMT -6
Did you try turning your idle speed down a little?
|
|
|
Post by Alleyoop on May 7, 2013 19:09:01 GMT -6
Yes, check your idle rpms first, it could be idling a little to high. Alleyoop
|
|
Clinician
Currently Offline
Posts: 22
Likes: 0
Joined: May 4, 2013 10:54:10 GMT -6
|
Post by chihuahuas on May 7, 2013 20:37:20 GMT -6
the springs cut into the pot metel making the clutch engage too early. It is a Suck Azz design. while in there service this.
|
|
|
Post by Alleyoop on May 7, 2013 21:16:46 GMT -6
That is a very nice adjustable clutch with a lot of pad material. Who makes that clutch and give us the link where to buy Share the find DAWG. Alleyoop
|
|
Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on May 8, 2013 7:43:22 GMT -6
This morning I did turn the idle down a little, when I first start out my clutch is working good, it seems after I'm riding 5miles or more it does this, and not all the time.
|
|
Clinician
Currently Offline
Posts: 22
Likes: 0
Joined: May 4, 2013 10:54:10 GMT -6
|
Post by chihuahuas on May 8, 2013 17:23:06 GMT -6
|
|
|
Post by Alleyoop on May 8, 2013 18:16:50 GMT -6
|
|
Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on May 9, 2013 11:54:25 GMT -6
I noticed today as I went scoot was running real good, even the clutch was working the way it should, (I tighten the intake clamp before I left) after about 13 mile, I notice the scoot surgibng or missing at stop light, I'm just wondering if that intake clamp working its way loose again and would effect the idle? Still looking for a good clamp.
|
|
Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on May 9, 2013 11:56:16 GMT -6
Here is the type I put on the exhaust intake, but this is a little too whide for the front intake manifold. Attachments:
|
|
Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on May 9, 2013 11:58:26 GMT -6
here is my intake manifold with the clamp I got with it. (junk) Attachments:
|
|