Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Jun 6, 2013 15:18:05 GMT -6
Have a good question I set valves on this 150cc to .004 on both and read about adjusting the carb air/mixture screw and cannot get the engine to stop idling up and down ..so wondering if maybe my valves are too tight would cause this up and down idling since adj the carb seems not to stop this ??
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Jun 6, 2013 15:22:31 GMT -6
Sounds like you make have an air leak.
|
|
Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Jun 6, 2013 15:59:17 GMT -6
how should I check that
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Jun 6, 2013 16:14:27 GMT -6
With engine running at idle spray or mist around the carb and under it and around the various hoses with water out of a windex bottle and that would even work. I use ether and a lot of people do not recommend that but just about any thing can be used to spray/mist and if you hit a air leak the engine speed will change. Carb cleaner can be used too. Engine speed might go up or go down but when you hit the leak it will change.
|
|
Senior Clinician
Currently Offline
East Tawas MI
Posts: 119
Likes: 0
Joined: Sept 11, 2011 14:47:52 GMT -6
|
Post by Tawas on Jun 6, 2013 19:49:30 GMT -6
thanks I will try that also can a bad battery affect how the motor runs ...like affect the spark or anything else or once its running the battery does nothing???because my battery is junk I jump start it to run
|
|