Crazy question probably By automotoguy (Read 570 times)

[jct842]

I think most of them come apart, just snap together. It would be worth a try. I would make an attempt to super glue it back. If it doesn't work your not out anything except a spot of glue. Depending on the break jb weld would be another option.

[sumdawgtwigg]

something like that would drive me crazy too.

[Random Hero]

it comes apart and goes back together easy..done it many times

[Alleyoop]

If you have done it many times don't boast about it, how about giving him some direction on how-to bud .
Alleyoop

[kz1000st]

Who cares about the tach, 40,000 miles! Holy cow, that's amazing. How many on the Automoto these days?

[Random Hero]

Well once you take the plastic cover off the handle bar there is normally 3-4 screws that hold the speedo in place. Undo the screws and the speedo will come right out. BTW I remove the speedo cable before i remove the screws. Once its out the clear cover will come off easy and the needles just slide up and off the post. As far as replacing them im not sure where to get them. I took mine off to try and adjust the speedo for better accuracy.

There you go Alley..no pics but thats how i do it.

[Alleyoop]

Thanks Bud, don't forget some of this guys are not mechanical at all.
Alleyoop