2007 Vento Triton, Wont stay running By mikey34 (Read 610 times)

[mikey34]

I think that I have an Airleak, Mixture Screw Problem, or just a bad carb.

I have cleaned the carb very thoroughly, but I can only get it started after spraying some starting fluid in the intake.

AFTER I have it started, it wont IDLE, if I keep the throttle
from 1/4 - WO, it will stay running.

BTW - I have taken the gas tank completely off and wash out with gas, cleaned the carb, new plug, new oil. I really think its an air/fuel problem.

THANKS GUYS!

[sumdawgtwigg]

Have you tried adjusting the mixture screw? It could also just be that you need to raise the idle speed. Start with the simple stuff first. i had a TaoTao that did the same thing and after a couple of cleanings of the carb I gave up and just bought a new carb. Ran great after that.

[kz1000st]

Anytime I hear "it won't run slowly", I think low compression. Are the valves adjusted right? Will it idle if you spray fluid through the carb lightly? It might just be crud in the carb so a little Seafoam might help.