|
|
Post by kz1000st on Jul 11, 2020 13:45:12 GMT -6
Time to recheck your valve adjustment. .004 inch on the intake, .005 inch exhaust.
|
|
|
|
Post by kz1000st on Jul 7, 2020 10:39:53 GMT -6
|
|
|
|
Post by kz1000st on Jun 25, 2020 18:57:25 GMT -6
Is there power to the ignition switch? Is the ground wire secure To the battery and the frame? The best you can do is start looking over all the wiring and connectors for a break.
|
|
|
|
Post by kz1000st on Jun 17, 2020 8:37:22 GMT -6
|
|
|
|
Post by kz1000st on Jun 16, 2020 20:21:06 GMT -6
Old time cures for a stuck float was to lightly tap on the carburetor or pick up the back end of the bike and bounce it. Maybe pinch off the fuel line and try starting it until the fuel drains out of the carb and the float hangs down taking the float needle with it. You then open up the fuel line and gas rushing in might flush out crud under the needle or unstick the float.
|
|
|
|
Post by kz1000st on Jun 14, 2020 18:57:18 GMT -6
Maybe inquire at the USA SYM importers website. Someone there might be able to help you.
|
|
|
|
Post by kz1000st on Jun 4, 2020 20:27:09 GMT -6
Look down below in the Manuals, Wiring Diagrams, Help files.
|
|
|
|
Post by kz1000st on May 29, 2020 16:10:07 GMT -6
Steering head bearings in the frame? Will the handlebars turn with the tie rod disconnect?
|
|
|
|
Post by kz1000st on May 22, 2020 16:23:06 GMT -6
Check the air filter and air box. Rich is black and wet. Black and sooty is usually an indication of air being choked off to the carburetor.
|
|
|
|
Post by kz1000st on May 12, 2020 19:11:16 GMT -6
Replace the intake manifold. They dry out and crack over time letting the engine run lean.
|
|
|
|
Post by kz1000st on May 7, 2020 18:28:21 GMT -6
Brake light switch or the kill switch got turned on by accident.
|
|
|
|
Post by kz1000st on Apr 25, 2020 14:10:26 GMT -6
|
|
|
|
Post by kz1000st on Apr 23, 2020 10:17:09 GMT -6
You have to begin at the beginning. Do the brake lights work? If not then the starter circuit isn't being completed when you pull in the brake lever and hit the starter button. Why it won't run? Valve clearances, spark plug, clogged carburetor. Remember you need fuel, compression, ignition and air for it to run.
|
|
|
|
Post by kz1000st on Apr 21, 2020 9:19:51 GMT -6
Okay, there have been 101 reads of this thread. No comments? Come on people. We would all be interested in hearing from people who own scooters, had one and got rid of it and people investigating the purchase of a scooter.
|
|
|
|
Post by kz1000st on Apr 19, 2020 15:47:56 GMT -6
Check all the vacuum lines and see if the intake manifold is cracked. Also have the valve clearances been checked. .004 intake, .005 inch exhaust.
|
|
