Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 23, 2012 13:03:36 GMT -6
sorry, jonway yy250t. thanks
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 23, 2012 12:38:21 GMT -6
hello fellas, when i replace the rectifier on my scoot (battery not charging), should i also replace the diode?  ?? thanks in advance. |
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 14, 2012 9:20:51 GMT -6
THANKS FELLAS FOR ALL THE ADVICE, HELP, ETC.ETC., AS I STATED B4 I FOUND THE HEAD GASKT I PURCHASED IN 2009 (DATE ON PACKAGE), CHANGED IT YEST. MORNING AND BIKE RA FOR 1 HOUR 45 MIN. WITHOUT OVRHEATING AT ALL, 2DAY GONNA START CLEANING HER UP AND PUTTING BODY BACK 2GETHER. THANKS AGAIN I CAN'T WAIT TO RIDE AND SEE HOW SHE DOES.....DID I SAY THANKS
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 13, 2012 4:52:40 GMT -6
ive located the head gasket i purchased a few years ago, theres a metal 1 and a paper type 1 in package, top of head uses the metal 1, after taking off top of cylinder i noticed the previous metal gasket is extremely thin,(alot thinner than new 1) would this have caused a problem with overheating
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 13, 2012 4:49:49 GMT -6
Thanks for info fellas
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 12, 2012 5:19:46 GMT -6
hello all, if my temp. gauge is bad (false reading) will my fan STILL be turning on??? if i want to check the oil temp after i get a HOT reading from my temp. gauge, do i simply stick themometer into oil pan?? thanks in advance
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 12, 2012 5:03:27 GMT -6
Thanks guys for all the advice, i will check the oil temp. also, what should the temp. read? also are you saying the gauge could read HOT and it NOT be hot? what switch/relay controls the temp. gauge, this could be bad right? |
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 11, 2012 9:28:46 GMT -6
Thanks gut, will try anything right about now.
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 11, 2012 5:12:37 GMT -6
Hello there i have the jonway 250 (like Cruiser's) i've changed the radiator, thermostat, fan switch, etc. the bike still overheats, once running and coolant flowing, should ALL 3 hoses become a little warm/hot to touch?? could it be the HEAD GASKET?? if its the HEAD GASKET should i NOT have have other running issues? or it would run fine until it begins to overheat? thanks in advance
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 10, 2012 6:04:30 GMT -6
thanks for the info, finally i think i have it all set up correctly now, ran for 30 mins. yest. without overheating, 2 other questions for you.....whats the best battery to get? ACID INSERT, OR REGULAR??? also i have 6 wires coming off of ignition switch, could you help me reconnect these? i have alarm and remote start as well, i know to get the lights to turn on as if key is turned to on i need to connect the red & black (From harnes end, not from ignition switch side) wires together in order to start it, now if i connect the red to red and blck to blck this doesnt work
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 9, 2012 13:12:09 GMT -6
thanks alleyoop
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 9, 2012 6:55:53 GMT -6
Thanks, looks more like my setup there, which bike and or manual is that diagram from? the hose coming FROM waterpump goes where?? the hose coming from the chrome radiator filler cap(NOT attached to actial raditor tho)goes where? thanks in advance
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 6, 2012 16:09:30 GMT -6
Can someone please post a diagram of the radiator hose connections? The hose coming from metal coolant cap under seat is my concern, bike is overheating and this hose has nothing flowing thru it, I wanna make sure its connected to correct side of radiator. Thanks in advance.
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 6, 2012 11:45:08 GMT -6
what kind of oil is best used in the jonway 250
|
|
Clinician
Currently Offline
Posts: 45
Likes: 0
Joined: Jun 20, 2011 5:56:49 GMT -6
|
Post by trvstlh on Jul 6, 2012 4:51:30 GMT -6
Morning , im back working on jonway 250, actually got it running (there was no compression) now to the overheating problem,, once i take off water pump housing and see the impeller turning CAN MY WATER PUMP STILL BE BAD? , i purchased new water pump assy (shaft,impeller, with seals and bearings) is there any instructions listed detailing the installation?? can impeller alone be bad??? please help. Thanks in advance. |
|
