Clinician
Currently Offline
Posts: 6
Likes: 0
Joined: Jan 8, 2012 16:45:09 GMT -6
|
Post by jcl250a on Jan 17, 2012 20:47:13 GMT -6
I like how this works Quick answers.
Thank you!
|
|
Clinician
Currently Offline
Posts: 6
Likes: 0
Joined: Jan 8, 2012 16:45:09 GMT -6
|
Post by jcl250a on Jan 17, 2012 20:29:55 GMT -6
Well doing a valve adjustment on my JCL MP 250 with just over 1,000 miles on it when I went to remove the lower exhaust valve cover there was about 4 ounces of oil that spilled out, is this normal?
|
|
Clinician
Currently Offline
Posts: 6
Likes: 0
Joined: Jan 8, 2012 16:45:09 GMT -6
|
Post by jcl250a on Jan 15, 2012 19:20:40 GMT -6
Hi everyone.
I finished my valve adjustment earlyer today, scooter runs great. I gained about 5 mph.
And I hope that it cured my starting trouble, I will have to wate and see.
while I had it apart i changed the spark plog (NGK DR8EA) parts guy said that it was nothing to upgrade to? I looked at the drive belt it was in good condition so no change at this time it is a
Gats Powerlink 85623.
All in all not a bad job just pulling all the plastic off to get to the valve's was the hard part. about a total of 4 hrs takeing my time and with out power tool's, left mine at work.
|
|
Clinician
Currently Offline
Posts: 6
Likes: 0
Joined: Jan 8, 2012 16:45:09 GMT -6
|
Post by jcl250a on Jan 14, 2012 14:55:02 GMT -6
|
|
Clinician
Currently Offline
Posts: 6
Likes: 0
Joined: Jan 8, 2012 16:45:09 GMT -6
|
blow by
by: jcl250a - Jan 13, 2012 22:50:19 GMT -6
Post by jcl250a on Jan 13, 2012 22:50:19 GMT -6
Try adjustingthe idle,
I found mine had backed off the stop
|
|
Clinician
Currently Offline
Posts: 6
Likes: 0
Joined: Jan 8, 2012 16:45:09 GMT -6
|
Post by jcl250a on Jan 13, 2012 21:43:08 GMT -6
My Jcl mp250A just turned 1,000 miles I am getting ready to adjust the valves and I would like to change the spark plug and drive belt. I would like to have them on hand before I pull it apart does any one know what spark plug and drive belt is required? I would like to upgrade so i do not want to order stock parts.
Thanks for any Help
|
|
