Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
wiring
by: Gysixxer - Mar 14, 2012 12:30:51 GMT -6
Post by Gysixxer on Mar 14, 2012 12:30:51 GMT -6
yeah i was thinkig buying new connectors.....
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
Post by Gysixxer on Mar 14, 2012 12:26:37 GMT -6
i went from dr pulley mix of 10g and 14g sliders, to just 9g rollers.....HUGEEEE DIFFERENCE on the good side....faster accell and no loss of top end...
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
wiring
by: Gysixxer - Mar 14, 2012 4:40:33 GMT -6
Post by Gysixxer on Mar 14, 2012 4:40:33 GMT -6
I thought hard wiring it from scratch would be considered making your own harness. Rich Correct. In my head I'm either thinking of using the same connectors that came on the scooter, or just buying new ones and make it myself.....still not sure yet....I really would like to get away from the Chinese wires and run better ones. |
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
wiring
by: Gysixxer - Mar 13, 2012 21:09:05 GMT -6
Post by Gysixxer on Mar 13, 2012 21:09:05 GMT -6
I'm not trying to be nasty but I would be glad to assist you step by step only if you're willing to take the body panels off, strip all the old wires, and hard wire it from scratch. I'm not going to try to figure out what's what on a Chinese harness. It's not difficult to wire them and if you really want to clean things up that's the way to do it IMO. By the way, in 'Bama you don't need turn signals on a motorcycle. I'm sure most states aren't like that. Rich Thanks. I started today by eliminating some of the wiring up front under the nose of the scoot. I am also having a starting issue....(prior to me messing with my scooter today) I did add a new starter relay and a new starter switch. Still not starting. But when I test the plugs with a light tester its clear that the power is there and that I can control it with the switch. So I'm not sure why its not working......I can jump the relay by connecting the terminals and it works.... So I have an issue in my wiring... Well what I am wanting to accomplish is to clean up the entire wiring system and only have headlights and brake lights and the ignition system. As well as make my harness more accessible, instead of having to pull apart the front fairring to get to it. I was either thinking in the glove box or under the floor mat, in the opening next to my battery box. That option IMO seems more easier, since if something goes wrong I can easisly get to it and also replace a wire or anything with out having to take off all The body panels. I think I broke my fear of messing with the harness, so I think simplifying it will be easy and tough at the same time. The only thing I may need help on is if I decide to make my own harness, where can I get the plugs and everything I need to make my own harness?  I'm hoping in the next week or 2 it will be done and I will be free of all electrical issues!!!! And see if I can find a way to tuck my wires as well!!! |
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
wiring
by: Gysixxer - Mar 12, 2012 19:29:25 GMT -6
Post by Gysixxer on Mar 12, 2012 19:29:25 GMT -6
Well I kind of got that basically but I also don't have a stock handlebars anymore, and do not have a stock speedo. Right now all the everything is sitting in my glove box. What I want to accomplish is to remove it completly from the harness. Not just have it tied up. I really want to make it simple...just have the wires I need to make it run.....and run the lights...
Pluuuuussssss, since I swapped out my handlebars and ripped out my cluster, I no longer know what wire is what. I figured it would be easier to go from the other end of the harness and work forward.
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
wiring
by: Gysixxer - Mar 12, 2012 19:09:51 GMT -6
Post by Gysixxer on Mar 12, 2012 19:09:51 GMT -6
Yeah I tend to do that, but I end up messing things up.......  |
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
wiring
by: Gysixxer - Mar 12, 2012 18:58:00 GMT -6
Post by Gysixxer on Mar 12, 2012 18:58:00 GMT -6
Ok. I need someone well verse in the wiring harness for a gy6 scooter....I want to simplify my wiring harness and remove all the crap I don't want from it...more or less I'm wanting to have a start button and kill swotch, headlights And brake lights...is anyone willing to help me accomplish this.I have a hard time reading the wiring digram. If anyone would help, I'd greatly appreciate it...
And yes I am fully aware that it is illegal to not have turnsignals. I use hand signals just fine. I just need to simplify it for myself....
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
Post by Gysixxer on Mar 10, 2012 21:34:38 GMT -6
damn $10.00 thats cheap. but $10.00 for shipping that is insane! less than $4.00 to ship that sucker USPS priority I didn't know about u Walter lol.... |
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
Post by Gysixxer on Mar 10, 2012 9:32:59 GMT -6
|
|
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
Post by Gysixxer on Mar 9, 2012 17:22:30 GMT -6
i have seen different sized pullers, also universal pullers that have both sizes on them. i purchased mine from ebay. and it was the same size.....
GY6 = LUCK OF THE DRAW...... ITS LIKE A RED HEADED STEP CHILD MOTOR.
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
Post by Gysixxer on Mar 9, 2012 17:08:54 GMT -6
Future_LED, Ebay Sellerthis is the ebay seller i purchased from....he has a website...i ordered this 1st set. and as soon as i installed them, i ordered another set from him....they are CRAZZZZZZYYYYYYYY BRIGHT!!!! The cool thing about them, is u can cust them down every 2in and solder new wires to them and make more accent lights around ur scooter....i will add pics of mine tonight... for 26.00 and 4 ft of led's, its plenty to lighten up ur ride...I may even order a 3rd set for some other ideas im having!!!!!
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
Post by Gysixxer on Mar 7, 2012 15:55:40 GMT -6
Added LED's, Will Post Pics Soon!!!
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
Post by Gysixxer on Mar 6, 2012 14:39:35 GMT -6
Just swaaped out to 9g rollers....faster acceleration and no loss of top end!!!!
|
|
Certified Clinician
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 15, 2012 20:46:29 GMT -6
|
Post by Gysixxer on Mar 6, 2012 1:40:00 GMT -6
Ive ordered from ScooterElements.com 3-4times already. Ive gotten the best deals, SUPER FAST shipping and excellent customer service.....I recommend everyone to ScooterElements.com ... HE WILL EVEN HELP YOU TROUBLESHOOT YOUR ISSUE'S ON FACEBOOK!!!!!!
Thanks for all the support. I look forward to my next purchase....Gotta get that CVT Tuned!!!!
|
|
