Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Oct 12, 2013 12:31:50 GMT -6
Ok.. I went and looked... they aren't in too bad of condition... all of them have dead batteries.. I need to take a spare battery up and try to start em...
The 250's.. don't have windshields! Bum deal.. but they aren't too much...
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Oct 12, 2013 12:24:37 GMT -6
I would think u can just order the lens... but I dunno.. I can't find it.. just as a whole is all
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Oct 9, 2013 20:51:56 GMT -6
www.towlot.com/auctions/001113.htmlAbout 3/4 down the page... there are 7 scooters for sale... I am thinking about bidding on basically all of these with a max of 300-400 each... depending on which one it is... If you notice... most have 1000 miles or less... so basically brand new... I know they are older in age 2007 2008 2010.. but only having a few miles... they gotta be worth something right Can anyone tell me why I shouldnt make an investment.. wait tell spring.. and try to sell em? Or keep a few.. I know i will be riding scoots tell I die... www.towlot.com/auctions/001113.htmlTHANKS all input is appreciated and welcome
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Oct 9, 2013 20:33:15 GMT -6
Hey I noticed my clear turn signal lens was missing tonight... went over all the roads i traveled... no luck Can anyone source the exact one I need? I will buy both if needed... Here is a pic of the rear of my bike  I need the other side than the one shown in the pic...THANKS |
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Oct 2, 2013 20:19:49 GMT -6
Tomorrow or this weekend i will break into variator and check it out... thanks for advice... i am not getting any oil blow by at the crankshaft that the variator mounts on.... I think you are correct about one of my rollers, because i am hearing a strange new noise at all times... and it sounds like it is coming from there... I will shoot video of CVT before i dismantle the variator and after... THANKS agn
As for the other noise.. could it be my valves? because that noise happens when it gets warmer... cant really hear it until temp starts to read on gauge.....Like the expansion of it getting warm makes the sound more noticeable because it is messing up more...? just a thought.... but i dont know anything
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Oct 2, 2013 14:12:19 GMT -6
When u speak of the oil loss... u mean the rear gear oil right? It is holding steady
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Oct 2, 2013 14:10:48 GMT -6
It is very possible.. it did look as if the varriator was uneven and wobbeling....I will have to check.. I told myself I wasmt screwing with the varriator this time.. and didnt even pull off the back half of it at all
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Oct 1, 2013 8:26:52 GMT -6
I dont see that fixing my problem... but maybe??? i just dunno
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Sept 30, 2013 19:15:42 GMT -6
I looked to make sure they were all there... and they were...
I am getting some vibration on the varriator and clutch.. the belt it for sure a lil wobblely.. but everything is..
I think I have decided to baby her until the spring.. then sell and buy new one.. unless someone can tell me something to check.. maybe a bracket or somethin... I dunno
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Sept 30, 2013 16:50:02 GMT -6
yeah.. i got it all put back together... the noise is still there and slipping is still happening at take off
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Sept 30, 2013 15:49:23 GMT -6
ok i got my new clutch shaft today... here is a short video... input is appreciated  |
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Sept 27, 2013 20:35:03 GMT -6
I used an impact wrench... I might have overtightened it.. thanks bud
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Sept 27, 2013 14:39:48 GMT -6
Thanks.. that's not causing my sound either.. my center stand does not touch anything but the frame..
I took apart the shaft area this afternoon and all looks well on the inside.. had plenty of new grease and everything still looks like new inside..
I did notice that the exhaust clamp was a little loose so I tightened it down.. there is like a metallic type of gasket that goes under the clamp.. I cany recall noticing it before... so I loosened it up first.. tucked the gasket like material back down and retightened. I won't be able to test it tell I get the new shaft come monday or tuesday.
I think maybe where my rollere are flat might has had something to do with rattle? Does that sound right? They are just small flat spots...
One more quick thing.. the sound gets louder as it gets warmer.. when I have been on road for more than 20 mins.. its very very loud. When I first start off.. I can hear it just barely under the sound of the engine.. but when warm.. it is louder than engine
Anything else while I am down would be appriciated
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Sept 27, 2013 10:04:21 GMT -6
I ordered another from pfs... damnit! Well now I get the chance to look inside and see if that was where my rattle was coming from... maybe I installed it a little wrong and it was wearing down the teeth? I dunno but will have to wait a a few days to find out.. just what I needed
While I am in there.. can anyone tell me where I can get the taller gears for the cf moto 250?
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Sept 27, 2013 9:54:35 GMT -6
Mother flipper!!!! Rahhhh.. so I had an hour before school started.. I thought.. well I have time to check fluids and check nut on bell housing...
Got cvt cover off.. and got out impact wrench... took off varriator... and then I tried to remove clutch nut.. and BAM the flippin shaft broke AGAIN! the fluid level was fine.. so i still dont know what the noise was from! But now i need another new shaft
Blahhh my faith in chinese scoots is dwindeling.. I love em.. and I hate em!
|
|
