Clinician
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 7, 2013 0:14:14 GMT -6
|
Post by nikolaijs on Jul 17, 2013 19:33:41 GMT -6
I have a Honda Dio SK50 1998.
I have cleaned the jets numerous times
I have noticed on the autobystarter 1 of the wires have snapped off, would this be why it's affecting the scooter?
|
|
Clinician
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 7, 2013 0:14:14 GMT -6
|
Post by nikolaijs on Jul 12, 2013 17:26:03 GMT -6
Recently I just got my scooter running easily, but idles for about 2 seconds then turns off. It also turns off when I release the rear brake.
Any ideas why this is happening
|
|
Clinician
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 7, 2013 0:14:14 GMT -6
|
Post by nikolaijs on Jul 9, 2013 0:53:03 GMT -6
Additional Information;
When I release the rear brake the motor stalls
Ans Do I need the enricher? Because 1 of the wires snapped.
|
|
Clinician
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 7, 2013 0:14:14 GMT -6
|
Post by nikolaijs on Jul 8, 2013 2:52:18 GMT -6
I've got a photo of my carb below, just noticed that there is a little bit of oil in there from the oil line, when I mixed up the lines. Would this affect why my scooter is not running without me giving it a little gas? and why it is slowing down when I accelerate then speeds up then slows down? (keeps repeating) Also could you help me out with the car adjustment. Says default setting for air screw initial opening is 1 - 1/4 out from closed. Don't know which screw is for the idle and air screw sorry.  |
|
Clinician
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 7, 2013 0:14:14 GMT -6
|
Post by nikolaijs on Jul 7, 2013 2:00:03 GMT -6
I'll post a picture of my carb tomorrow, Need some help kind of
|
|
Clinician
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 7, 2013 0:14:14 GMT -6
|
Post by nikolaijs on Jul 7, 2013 0:54:22 GMT -6
Alright I'll check it out thanks.
|
|
Clinician
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 7, 2013 0:14:14 GMT -6
|
Post by nikolaijs on Jul 7, 2013 0:20:37 GMT -6
Hi,
I have a Honda Dio SK50 1998 scooter. I am able to get it running with 2 kicks of the kickstart but it won't stay running when I let the throttle off. Also when I accelerate to the max it runs fast then slows down then accelerates again, keeps doing it.
I don't know if it's the carb or if i haven't sealed the the engine with gasket seal.
Any help would be appreciated
|
|
