|
Post by cyborg on Dec 4, 2019 8:41:01 GMT -6
Who knows with Chinese scoots,,,only generic ones that I know of and I'd be lucky to find a specific one
|
|
|
Post by cyborg on Dec 4, 2019 8:33:14 GMT -6
Most likely the pickup sensor not sending a signal to the cdi,,,but first check all the grounds from the battery to the frame and make sure all the battery terminals are clean and tight
|
|
|
Post by cyborg on Dec 4, 2019 8:22:54 GMT -6
Most likely the previous owner ran it out of oil and there was a soft seize,,,pull the head and see if the cylinder is scored
|
|
|
CDI Help
by: cyborg - Dec 4, 2019 8:19:26 GMT -6
Post by cyborg on Dec 4, 2019 8:19:26 GMT -6
Contact Jim at rapid repair or the tech Lin at parts for scooters
|
|
|
Post by cyborg on Nov 28, 2019 10:34:51 GMT -6
Great news!!!!
|
|
|
Post by cyborg on Nov 19, 2019 8:11:51 GMT -6
Sounds like a decent deal to me,,
|
|
|
Post by cyborg on Nov 4, 2019 9:05:04 GMT -6
Introduce gas into the carb and you should hav it pop,,,if it does you know it's a carb problem
|
|
|
Post by cyborg on Nov 4, 2019 8:57:36 GMT -6
Haven't a clue,,,Dan was never the same after his dad died,,he moved to Florida as I understand it,,,,got divorced and probably got overwhelmed,,,that's my call on it
|
|
|
Post by cyborg on Oct 31, 2019 6:56:50 GMT -6
That could be it
|
|
|
Post by cyborg on Oct 29, 2019 7:42:14 GMT -6
Pull the plug check gap and dry it or install a new one,,,it's probably fouled,,,I forgot to add while the plug is out turn the engine over for a few seconds with the plug out,see if any liquids come out the plug hole
|
|
|
Post by cyborg on Oct 28, 2019 7:15:50 GMT -6
White smoke in the exhaust gas means blown head gasket or a cracked cylinder,,coolant is getting into the cylinder
|
|
|
Post by cyborg on Oct 27, 2019 9:20:12 GMT -6
Try introducing fuel into the carb throat and try and start it,,,if it runs for a bit then die it's a fuel delivery issue
|
|
|
Post by cyborg on Oct 27, 2019 9:13:20 GMT -6
You'll Ned to reconnect the automatis fuel valve to get gas to the carb,,,generally they com off Th intakeplugg manifold,then you hav to search where th other one comes from if it's not necessary just plug it and TI it off to the frame out of the way
|
|
|
Post by cyborg on Oct 26, 2019 7:29:10 GMT -6
Open filters are fine you'll have to rejet to get the mixture back in line,,,I'd do the exhaust also as long as you're doing it,,,you'll gain a few hps
|
|
|
Post by cyborg on Oct 26, 2019 7:25:37 GMT -6
My bet is on the belt is getting funky or something is sticky in the variator
|
|