Certified Clinician
Currently Offline
Posts: 52 
Likes: 0
Joined: Apr 8, 2014 2:08:17 GMT -6
|
Post by masterburt on Apr 10, 2014 12:24:18 GMT -6
About to order the naraku 70cc kit for my 2 stroke sx1 anyone recommend a good Carb jet,clutch spring,ect etc looking for something with good top end.
These are the things ive done so far.
Bigger carb
unrestricted cdi
K'n filter
naraku belt
anything that's working with your machines that you thinks a good setup would be appreciated on your feedback
thanks Guys/girls
|
|
Certified Clinician
Currently Offline
Posts: 52
Likes: 0
Joined: Apr 8, 2014 2:08:17 GMT -6
|
Post by masterburt on Apr 9, 2014 13:43:31 GMT -6
Thanks just what i needed.... much appreciated  |
|
Certified Clinician
Currently Offline
Posts: 52
Likes: 0
Joined: Apr 8, 2014 2:08:17 GMT -6
|
Post by masterburt on Apr 9, 2014 11:57:00 GMT -6
Installed a brand new carb bike starts great no fuss you sit on it and give throttle and it boggs out am i right in saying the carb setting are all the way in and 2 and a half back..
|
|
Certified Clinician
Currently Offline
Posts: 52
Likes: 0
Joined: Apr 8, 2014 2:08:17 GMT -6
|
Post by masterburt on Apr 9, 2014 11:51:11 GMT -6
LOLL... I did as a child.I got the bike on idle and connected the voltage meter to the battery and the voltage reading was 12.36 volts is that normal for a 2 stroke 50cc bike ? Also i noticed that when the bike was running the Resistor gets really hot is that normal?
|
|
Certified Clinician
Currently Offline
Posts: 52
Likes: 0
Joined: Apr 8, 2014 2:08:17 GMT -6
|
Post by masterburt on Apr 8, 2014 2:20:51 GMT -6
 Currently have a sachs sx1 50cc 2t. What should the voltage be coming off the wires on the stator?. i put my fingers on them crank the engine and get a shock (works) i just wanted to test the voltage. should it be 12 volts ? any info would be appreciated |
|
Certified Clinician
Currently Offline
Posts: 52
Likes: 0
Joined: Apr 8, 2014 2:08:17 GMT -6
|
Post by masterburt on Apr 8, 2014 2:16:51 GMT -6
I had this problem but with a 139qmb engine.i just changed the wirng loom including components and sorted it,cheap nasty chinese bikes Never again
|
|
