|
|
Post by heruk on Feb 6, 2015 14:24:15 GMT -6
second kenda
second stripped bead.
lubed and still tearing. Wont buy kenda again
|
|
|
|
Post by heruk on Feb 2, 2015 18:15:08 GMT -6
Hi
how high do you guys rate the Kenda K413's
|
|
|
|
Post by heruk on Jan 26, 2015 19:11:26 GMT -6
Thanks
|
|
|
|
Post by heruk on Jan 26, 2015 11:03:17 GMT -6
the distance is about the same but im sure the bead isn't seated properly
|
|
|
|
Post by heruk on Jan 26, 2015 9:07:44 GMT -6
how tight? should it make an indentation?
|
|
|
|
Post by heruk on Jan 26, 2015 7:37:21 GMT -6
I'm not sure exactly what you mean by bead is set. my assumption is you mean that the inner edges of the tire are flush against the rims edge as opposed to stuck in the center of the rim... get me? The tire seems to be in position as I even used a tire iron to pull the tire into position. so yea the bead appears to be set but I'm assuming set means no air will come out of the side because the tired is flush with the rim.
a ratchet strap? how tight?
|
|
|
|
Post by heruk on Jan 26, 2015 6:16:18 GMT -6
do you have to balance an inner tube? or do you just put it in and pray?
|
|
|
|
Post by heruk on Jan 25, 2015 20:57:39 GMT -6
thanks
|
|
|
|
Post by heruk on Jan 25, 2015 15:45:57 GMT -6
I cant get it filled. I even used the tire iron to pull t he tire past the bead and it still wont inflate... it comes out of this spot  |
|
|
|
Post by heruk on Jan 25, 2015 12:52:04 GMT -6
its on but now i have to take it off again to fill it... lol
|
|
|
|
Post by heruk on Jan 25, 2015 9:57:35 GMT -6
should have sanded and greased the rim...
|
|
|
|
Post by heruk on Jan 25, 2015 8:56:15 GMT -6
all that crap and the tire wont inflate past the bead
|
|
|
|
Post by heruk on Jan 24, 2015 15:14:14 GMT -6
looks so, cyborg
Should I clean this stuff out of the rim?
|
|
|
|
Post by heruk on Jan 24, 2015 11:45:24 GMT -6
so its the bearing that is keeping it stuck?
|
|
|
|
Post by heruk on Jan 23, 2015 23:12:33 GMT -6
thanks
|
|
