|
|
Post by cyborg on Nov 23, 2014 0:28:00 GMT -6
There is no compression in this last video
|
|
Administrator
Currently Offline
Posts: 1,565 
Likes: 51
Joined: Jan 27, 2014 13:58:53 GMT -6
|
Post by JR on Nov 23, 2014 9:04:19 GMT -6
I've read this whole thread from start to finish and my opinion?  |
|
|
|
Post by cyborg on Nov 23, 2014 9:15:38 GMT -6
My call is part of the manifold Oring is fused to one of the valve seal faces and holding the valve open,,,so no compression
|
|
|
|
Post by heruk on Nov 23, 2014 10:09:12 GMT -6
against the head cover
|
|
|
|
Post by heruk on Nov 23, 2014 11:30:12 GMT -6
There is no compression in this last video thats because the spark plug was not in the whole rich... jk so what do you suggest i check for? the whole pushes my finger off |
|
|
|
Post by heruk on Nov 23, 2014 11:33:56 GMT -6
My call is part of the manifold Oring is fused to one of the valve seal faces and holding the valve open,,,so no compression Im pretty sure it wasnt. i didnt get all of the o ring out htough so that may be the problem. @alleypoop do you guys recall when the intake side of the cam holder was not tightened enough? i tightened it down without a torque wrench and got it to run. Is it possible that Id have to use more sq ft lbs now that i hand tightened it like my name was Arnold at that incident?? |
|
|
|
Post by Alleyoop on Nov 23, 2014 12:35:23 GMT -6
My call is part of the manifold Oring is fused to one of the valve seal faces and holding the valve open,,,so no compression +10 on that one. So Heruck take the head off and clean out the valve seats. Then test them pour some gas by the springs and see if it leaks out the valve. Alleyoop |
|
|
|
Post by heruk on Nov 23, 2014 12:45:08 GMT -6
ok
|
|
|
|
Post by cyborg on Nov 23, 2014 14:01:38 GMT -6
before you take it apart if you havn't already,,, put the plug in snug and rotate the engine by hand thru a compression cycle if you hear a hissing sound or air leaking from anywhere thats where the base problem lies
|
|
|
|
Post by heruk on Nov 23, 2014 15:35:04 GMT -6
ill check that
|
|
|
|
Post by heruk on Nov 26, 2014 15:25:59 GMT -6
I havnt had the chance to work on the bike yet so i havnt cleaned out the valves and done the gas test.
i was wondering if not being able to tighten the bolts for the exhaust connection at the cylinder head could be the problem
|
|
|
|
Post by heruk on Nov 29, 2014 21:42:20 GMT -6
so i got a new o ring and spark plug. it seems to want to start and I smell burning fuel(exhaust) but it just wont start. The spark is red and blue... Faulty coil?
havnt checked the valves yet
|
|
|
|
Post by heruk on Nov 29, 2014 22:33:03 GMT -6
god  can i buy to make this all go away?!?! |
|
|
|
Post by cyborg on Nov 29, 2014 22:48:37 GMT -6
A Sym
|
|
|
|
Post by heruk on Nov 30, 2014 5:40:50 GMT -6
阿随员们?
|
|
..BAD TO THE BONE..
can i buy to make this all go away?!?!