|
|
Post by heruk on Oct 18, 2014 0:15:02 GMT -6
K thanks Alley I'll do that in the morning
|
|
|
|
Post by heruk on Oct 18, 2014 8:21:41 GMT -6
So if it is bad gas would draining the bad and replacing it with good be all that is required?
|
|
|
|
Post by heruk on Oct 18, 2014 8:47:13 GMT -6
still not starting...
|
|
|
|
Post by Alleyoop on Oct 18, 2014 10:31:58 GMT -6
On one of the last videos trying to start it there is a sound like sucking like Vacuum leaking.
Is your PLUG HOLE stripped and the PLUG will not tighten up? Reason I ask is in that Video it sounded like Air was escaping when you were cranking it to see if it would start.
Alleyoop
|
|
|
|
Post by heruk on Oct 19, 2014 10:20:13 GMT -6
no the hole is not stripped. i took extra care for it not to strip since i did that to another head before.
|
|
|
|
Post by Alleyoop on Oct 19, 2014 10:27:52 GMT -6
Well I think you have a compression leak or maybe the piston is shot I can hear sucking in the Video.
You may have to take the head off and check it out we have gone through everything and all is good so It may be you have a hole in the piston or a bad valve.
Alleyoop
|
|
|
|
Post by heruk on Oct 19, 2014 10:28:27 GMT -6
I jumped it with cables too and it didnt start
|
|
|
|
Post by heruk on Oct 19, 2014 10:29:43 GMT -6
ok so how do i determine if the valve is bad or if there is a whole in the piston? should I rule out the carburetor?
|
|
|
|
Post by heruk on Oct 19, 2014 10:30:43 GMT -6
what is someone put water in my tank. what will that do?
|
|
|
|
Post by Alleyoop on Oct 19, 2014 10:53:48 GMT -6
If water is in the tank it will not fire. So drain the tank and put some good new fuel in it. I thought you already did that since you said it acted funny when you put in 87 octane.
We have gone through this before you cranked it and took out the plug and it was wet. Which means the plug is not firing or the fuel is bad to much water in it and it will not ignite.
|
|
|
|
Post by heruk on Oct 19, 2014 11:08:22 GMT -6
yea i changed the gas Im just wondering weather or not the carb has anything to do with it
|
|
|
|
Post by cyborg on Oct 19, 2014 12:36:18 GMT -6
the head may be loose,,,double check if you have the gasket on correctly and the head is torqued down to spec,,,,
|
|
|
|
Post by heruk on Oct 19, 2014 13:15:44 GMT -6
ok so ill check and tighten the head but is there an image or a video that will show me what a bad piston or valve loos like?
|
|
|
|
Post by Alleyoop on Oct 19, 2014 13:37:01 GMT -6
Are you sure you have compression, and the plug is firing? with it cranking like that IF there was a bit of gas in there it would at least give out a weak fire.
So I have to ask again are you sure the plug is firing and you have compression.
I think you do not have one or the other.
Alleyoop
|
|
|
|
Post by heruk on Oct 19, 2014 14:25:22 GMT -6
well when i put my finger on the whole it pushed it off and when i put the plug against the headcover it sparked, you saw that in the video
|
|
..BAD TO THE BONE..
