Clinician
Currently Offline
Hello, 50cc gy6, whats the differance in veriator roller and a slider? and what is stock weight?
Posts: 2 
Likes: 0
Joined: Oct 31, 2014 13:35:46 GMT -6
|
Post by scootrscott on Dec 29, 2014 18:51:20 GMT -6
what is the differance in rollers and sliders? interchangeable? 1p39qmb stock weight?
|
|
|
|
Post by cyborg on Dec 29, 2014 19:26:28 GMT -6
Huge difference in opinion on sliders or rollers,, the thought was since rollers develope flat spots it means they are dragging and not rolling anyways,,,, some builders swear by one camp or the other,,, Sym uses a conical roller and they are probably making the best scooter in all of scooterdom so pick your camp
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Dec 29, 2014 21:32:47 GMT -6
Also there doesn't seem to be a stock weight.....they use what ever they have. There are some used more than others. Take yours out and weigh them and go from there. If you need more take off go lighter, if you want more top speed go heavier.
|
|
Senior Clinician
Currently Offline
Posts: 127
Likes: 8
Joined: Jan 27, 2013 11:14:24 GMT -6
|
Post by scoot on Dec 30, 2014 13:25:28 GMT -6
scootrscott, cyborg, jct842 Hi just went though this same problem what weight do I have? you have to weigh them, so I took the advice of the guys on this forum that know and purchased a gram scale. found one on ebay for $9.99 and no shipping worked like a charm, mine were 12 grams you can't make a good chose if you don't know where to start.well theirs my two cents worth .get a scale. good luck.
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Dec 30, 2014 21:50:45 GMT -6
Any special tools required to get to the rollers?
|
|
|
|
Post by Alleyoop on Dec 30, 2014 22:22:44 GMT -6
|
|
Clinician
Currently Offline
Hello, 50cc gy6, whats the differance in veriator roller and a slider? and what is stock weight?
Posts: 2
Likes: 0
Joined: Oct 31, 2014 13:35:46 GMT -6
|
Post by scootrscott on Jan 1, 2015 17:31:24 GMT -6
Thank you all SO much! I learned alot.
I am going to purchase a cam next. i have a 1p39QMB. what is A9, AM01
Also final gears. I see 49-17 in many suppliers. Is that good? I only have bolt on upgrades. no heavy eng.
|
|
..BAD TO THE BONE..