|
|
Post by heruk on Jan 20, 2015 15:39:40 GMT -6
cant get the swingarm off. I'm trying to do it without the gear tool
|
|
|
|
Post by Bashan on Jan 20, 2015 16:43:07 GMT -6
The video is private. We've been over this, don't make me hit you again. The swingarm is held on by the bolts to the engine case and the axle nut. Sometimes you have to get a wood stick like a 2X2 and tap through from the other side. Don't go mental on it, just keep tapping with a little force and it will work loose. Remember to swear, that always helps.  Rich
|
|
Ad Free Donut
Currently Offline
A bike is music to my ears.
Posts: 1,655
Likes: 93
Joined: Oct 22, 2013 4:11:04 GMT -6
|
Post by Guitarman on Jan 21, 2015 4:54:04 GMT -6
I think you hit him too hard last time Rich....
|
|
|
|
Post by heruk on Jan 21, 2015 9:42:21 GMT -6
haha yea the first time he hit me he touched my little heart too hard
got a gear puller from advanced auto and broke it trying to get the wheel off. I guess Ill try the 2x4 method now, but if it is so hard to take off wont it be hard to put on?
|
|
|
|
Post by heruk on Jan 21, 2015 12:45:31 GMT -6
2x4 didnt work
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 155
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Jan 21, 2015 12:57:19 GMT -6
If you broke a gear puller you are doing some thing wrong. Likely there is a nut or a bolt you are over looking.
|
|
|
|
Post by cyborg on Jan 21, 2015 15:41:10 GMT -6
pics would be nice
|
|
Senior Clinician
Currently Offline
Posts: 225
Likes: 40
Joined: Sept 16, 2013 18:11:26 GMT -6
|
Post by jerryscript on Jan 21, 2015 16:11:28 GMT -6
He already posted a very nice pic. Didn't you notice his avatar? |
|
|
|
Post by cyborg on Jan 21, 2015 18:22:41 GMT -6
Yea I did notice,,, I'm not dead yet
|
|
|
|
Post by heruk on Jan 21, 2015 21:45:16 GMT -6
lol i put it back together but the video isnt private anymore. The swing arm comes off about 1/4cm cant get it any further  |
|
|
|
Post by Bashan on Jan 22, 2015 10:04:00 GMT -6
Take a pic of the end of the axle where the nut was attached.
|
|
|
|
Post by heruk on Jan 22, 2015 19:41:41 GMT -6
Right, that pic was taken before it snowed yesterday and was taken by mistake while preparing the phone for the video. I loathe taking the bike apart again. As you should be able to see from the video there was a nut and a small spacer that came out and there appears to be another spacer behind it which I'm assuming is the problem. It is supposed to snow again tomorrow so depending on when I get the chance and when it starts to faal i will be able to take another picture. For now do you have any more advice? I wasn't able to put the swing arm all the way back on either.
|
|
|
|
Post by Bashan on Jan 22, 2015 20:50:01 GMT -6
The bearing is stuck, try some penetrating oil and you might try heating it with a charcoal lighter. I see what you're saying about the video but it really isn't that clear. Here's a swingarm I took off of a Bashan 150:
The red arrows point to the attachment points. If they are loose the only thing holding it is the bearing.
|
|
|
|
Post by heruk on Jan 22, 2015 22:32:11 GMT -6
yes they are loose. where did that clip com from? clip |
|
|
|
Post by heruk on Jan 23, 2015 9:31:03 GMT -6
smmfh...
I saw no clip in any videos...
|
|
Rich
