Reaserched couldnt find help.. No spark By 2001eton (Read 4,014 times)

[2001eton]

Ok so i had spark then it stopped sparking its 2001 eton i used a 12 volt test light and im getting voltage to the wires leading to the ignition coil bought a new one and still no spark..ps im not using a battery just kick start.. No ignition key help me please... Idk if its a ac or dc cdi ... Idk how to post pics

[2001eton]

Sept 24, 2015 16:13:07 GMT -6 2001eton said:

Ok so i had spark then it stopped sparking its 2001 eton i used a 12 volt test light and im getting voltage to the wires leading to the ignition coil bought a new one and still no spark..ps im not using a battery just kick start.. No ignition key help me please... Idk if its a ac or dc cdi ... Idk how to post pics

[cyborg]

Well it's either the cdi or the pickup coil,,,I just reread your post ,,,no battery ,,,so what are you running a capacitor?,,, the stator may have taken a dive and not making any juice,,,when you kick it do the lights come on till it stops spinning?

[2001eton]

Pick up coil?? Its a moped its suppose to have s battery is not there its starts by kick start first got it replaced a gasket ran but died at full throttle now theres no spark.. The head lights never turnt on untill i hit throttle the oil light kicks on when i kick it over

[2001eton]

Idk what u mean by capacitor.. I hooked up a 12v test light to where the spark plug wire/ ignintion coil the light turns on

[2001eton]

But no spark its a brand new wire/coik

[cyborg]

i would be checking if the engine ground either came off or the wire broke,,if you have a decent engine to frame ground i would be suspecting the rest of the ignition system which is the cdi or the little coil by the flywheel that sends a low voltage signal to the cdi and tells it to fire

[2001eton]

If im getting voltage to the cdi nd up to the ignition coil using a 12v test light shouldn't it spark when i plug the the coil in? Where would the engine ground be?

[cyborg]

just run a good sized wire like 8 or even 10 gauge from a good frame bolt to the valve cover and see if it will lite

[2001eton]

It had spark something happend.. But im getting power to the coil just not through the coil to the plug... I should be getting 12vdc going into the coil right?.. But how should i hook up the wire to the valve cover?

[Guitarman]

I'd also look at the R/R.

[2001eton]

Sept 25, 2015 15:12:09 GMT -6 Guitarman said:

I'd also look at the R/R.

Ummm lets pretend i dont know what you mean by r/r

[Guitarman]

Lets pretend I don't either. 












Regulator/Rectifier

[2001eton]

Sept 25, 2015 15:37:33 GMT -6 Guitarman said:

Lets pretend I don't either. 












Regulator/Rectifier

How can i test that??

[2001eton]

Also i re hooked up the test like to the 2 wires going into the coil and it seem to be dimmer then what it was at first