Screws and Quick Nuts By damin69 (Read 676 times)

[damin69]

Ok guys where do you get these things. I have tried the Quick nuts at Autozone and Oreilly's but they do not work well with the Chino crap.
I have some that are getting quite wore from the almost daily body removal I have been doing lately. I also need to pick up some extra screws.

I want to find ones Identical to the ones I am taking off.

[zugzug]

My local Pepboys have some like that but Im not sure if all thier stores will. Just about any real hardware store will have them. Theres a lil independant store a few miles from me. YOu wouldnt think they have much there since its small but they always have what I need.
-Zug

[Smorkle]

I've had mine off a few times as well and could use some more screws and speed nuts. I'm probably just gonna run take a look at Ace hardware up the street before I start worrying too much. I could use about 10 or so screws. I have the emptys in strategic locations around the scooter that are unnoticeable.

[scooterran]

ACE HARDWARE

[damin69]

Yeah our ace probably has them. I would like some place to buy them where I am not paying $.50-$1.25 each for items. Our Ace Here is quite expensive.

[scooterran]

Just a thought. Try your local machine shop and see if they have the screws. I'm going to check mine next week. The clips, try Nappa, Autozone, or any carparts store. Ace did have the speed clips and I bought a few.

[daver]

Damin,
I bought myself a kit of decent quality at my local Harbor Freight.. Work perfect and only cost me a few $$ for a good supply in a nice plastic case.. Heres a link to the online view.. www.harborfreightusa.com/usa/itemdisplay/displayItem.do?itemid=90200&CategoryName=HARDWARE STOREHOUSE&SubCategoryName=Storehouse Fasteners and Assorted Hardware

or:

www.mcmaster.com/#clip-on-nuts/=83t45b

www.mcmaster.com/#tapping-screws/=83t7m9

Good luck, Dave

[250cc]

Ace has them but they are pricey. Advance Auoto Parts and AutoZone has them in small packs in their HELP sections.