Clinician
Currently Offline
Posts: 43
Likes: 0
Joined: Jun 19, 2011 12:07:13 GMT -6
|
Post by dyoung1167 on Nov 6, 2016 12:59:01 GMT -6
going to remove the intake manifold on qlink peg. the other side is of course a regular bolt but this has no gripping edge, no marks lilke someone just messed it, in fact it is chromed. i couldn't tell ya how it was even tightened.
has anyone run into this and am i just missing something? some odd trick? i even tried to turn the whole thing hoping to maybe loosen it but not willing to try to hard and break anything.
|
|
Clinician
Currently Offline
Posts: 43
Likes: 0
Joined: Jun 19, 2011 12:07:13 GMT -6
|
Post by dyoung1167 on Nov 6, 2016 12:59:24 GMT -6
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Nov 6, 2016 13:35:53 GMT -6
looks like a rivet. maybe drill it with a reverse bit.
John
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Nov 6, 2016 15:16:07 GMT -6
Looks like a rivet to me also. IF it is I going to be the threads are buggered up.
Did you get the scooter new or did a previous owner do it!
|
|
Clinician
Currently Offline
Posts: 43
Likes: 0
Joined: Jun 19, 2011 12:07:13 GMT -6
|
Post by dyoung1167 on Nov 6, 2016 21:40:54 GMT -6
it is chromed with no tool markings and no center, meaning i know it is NOT a rivet. click the pick and you will see
|
|
Certified Clinician
Currently Offline
Posts: 69
Likes: 6
Joined: Apr 21, 2010 22:19:35 GMT -6
|
Post by thecableguy on Nov 8, 2016 15:50:14 GMT -6
Vice-Grip? Or drill and EZ-Out...
Replace with a proper stud and nut when you are done.
Jim
|
|
|
|
Post by cyborg on Nov 17, 2016 21:50:18 GMT -6
We went thru this before,,, that is a flange head bolt ,,, the head sheared off on installation nothing more,,, drill easyout replace
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Nov 18, 2016 4:41:00 GMT -6
I like the reverse bits, when they bite they back the screw/bolt out.
John
|
|
