Clinician
Currently Offline
Posts: 12 
Likes: 1
Joined: May 31, 2017 16:34:00 GMT -6
|
Post by roadwolf on May 31, 2017 16:38:16 GMT -6
DOes this sound to loud to you all? i did both in and out at .005. This is my first time ever doing it should i redo it? Can I ride it like this until saturday?? thanks a lot all
|
|
Certified Clinician
Currently Offline
Posts: 54
Likes: 1
Joined: Mar 20, 2017 19:39:18 GMT -6
|
Post by elcamino121 on May 31, 2017 17:40:23 GMT -6
Those are toooooo loose!!
You should have had a slight drag or a snug fit with the feeler gauge.
Personally, I would redo them, but that's just me.
elcamino121.
|
|
Certified Clinician
Currently Offline
Posts: 54
Likes: 1
Joined: Mar 20, 2017 19:39:18 GMT -6
|
Post by elcamino121 on May 31, 2017 17:41:44 GMT -6
Second thought. Was the cam in the correct place when you set them??
|
|
Clinician
Currently Offline
Posts: 12
Likes: 1
Joined: May 31, 2017 16:34:00 GMT -6
|
Post by roadwolf on May 31, 2017 17:48:45 GMT -6
think it was TDC the large O was in the center of the 2 valves and on the inside of the fan, the letter T was pointing towards a piece of metal inside the fan just like i saw in a youtube video on valve adjustment. So I hope I did it right on that front. I won't be able to work on the bike until saturday due to work. If I ride it like this until saturday will the bike be ok? thhanks!
|
|
Certified Clinician
Currently Offline
Posts: 54
Likes: 1
Joined: Mar 20, 2017 19:39:18 GMT -6
|
Post by elcamino121 on May 31, 2017 17:54:01 GMT -6
How far and how fast is the trip.
|
|
Clinician
Currently Offline
Bonehead
Posts: 38
Likes: 3
Joined: Mar 31, 2017 11:13:10 GMT -6
|
Post by bonbhead on May 31, 2017 17:55:59 GMT -6
Road Wolf, take a look at this link and go down to the 8th photo. Look at the holes and where positioned. I pull the plug and turn the hub with a rachet and socket to get into the proper position. I set mine at .004/000 on both exhaust and intake. I feel .005 is too much. www.chinesescooterreference.com/jr/Valve_Troubleshooting_Adjusting.pdfFollow the instructions.  |
|
Clinician
Currently Offline
Posts: 12
Likes: 1
Joined: May 31, 2017 16:34:00 GMT -6
|
Post by roadwolf on May 31, 2017 17:56:06 GMT -6
its 4 miles a day 50mph
|
|
Clinician
Currently Offline
Posts: 12
Likes: 1
Joined: May 31, 2017 16:34:00 GMT -6
|
Post by roadwolf on May 31, 2017 17:58:13 GMT -6
wow this is great thanks! Hope my bike can last til saturday :x
|
|
Clinician
Currently Offline
Posts: 12
Likes: 1
Joined: May 31, 2017 16:34:00 GMT -6
|
Post by roadwolf on May 31, 2017 17:59:07 GMT -6
you set yours at .004 intake and .004 out?
|
|
Clinician
Currently Offline
Bonehead
Posts: 38
Likes: 3
Joined: Mar 31, 2017 11:13:10 GMT -6
|
Post by bonbhead on May 31, 2017 18:16:11 GMT -6
Yes, I have tried .003 on intake and .005 on exhaust.
I have tried .004 on intake and .005 on exhaust.
I have found that .004 on both intake and exhaust work good for me on a gy6 150cc.
|
|
Clinician
Currently Offline
Bonehead
Posts: 38
Likes: 3
Joined: Mar 31, 2017 11:13:10 GMT -6
|
Post by bonbhead on May 31, 2017 18:19:13 GMT -6
I might be afraid on running that like that on your 8 mile run at 50mph. I think you may be really taking a chance on that. It sounds pretty rough.
|
|
Clinician
Currently Offline
Posts: 12
Likes: 1
Joined: May 31, 2017 16:34:00 GMT -6
|
Post by roadwolf on May 31, 2017 18:21:44 GMT -6
I might be afraid on running that like that on your 8 mile run at 50mph. I think you may be really taking a chance on that. It sounds pretty rough. Thanks im going to take my truck tomorrow and do the valvesright after work im not going to risk it. Thanks a bunch |
|
Clinician
Currently Offline
Posts: 12
Likes: 1
Joined: May 31, 2017 16:34:00 GMT -6
|
Post by roadwolf on May 31, 2017 18:23:40 GMT -6
Yes, I have tried .003 on intake and .005 on exhaust. I have tried .004 on intake and .005 on exhaust. I have found that .004 on both intake and exhaust work good for me on a gy6 150cc. Thanks ill try that can i turn it on with only two screws in the valve cover just to hear it sound for a couple secs and redo if i must? |
|
Clinician
Currently Offline
Bonehead
Posts: 38
Likes: 3
Joined: Mar 31, 2017 11:13:10 GMT -6
|
Post by bonbhead on May 31, 2017 20:01:35 GMT -6
Yes, I have tried .003 on intake and .005 on exhaust. I have tried .004 on intake and .005 on exhaust. I have found that .004 on both intake and exhaust work good for me on a gy6 150cc. Thanks ill try that can i turn it on with only two screws in the valve cover just to hear it sound for a couple secs and redo if i must? I imagine so guy. It would be a good idea to put the cover back on so u don't sling oil out. Put on bolt on bottom left and top right. just snug them up. I hope I am wrong but if that is not it a It may be a I hope I am wrong but that what it kind of sounds like the more you listen to it. |
|
Clinician
Currently Offline
Posts: 12
Likes: 1
Joined: May 31, 2017 16:34:00 GMT -6
|
Post by roadwolf on Jun 1, 2017 4:44:05 GMT -6
Thanks ill try that can i turn it on with only two screws in the valve cover just to hear it sound for a couple secs and redo if i must? I imagine so guy. It would be a good idea to put the cover back on so u don't sling oil out. Put on bolt on bottom left and top right. just snug them up. I hope I am wrong but if that is not it a It may be a I hope I am wrong but that what it kind of sounds like the more you listen to it. i hope not it only has 1400 miles the sound only happened right after adjust before she would purrr but would have trouble staying on and i found that the adjustmeent was superrrr tight the rocker would not even move a little on tdc will post a video of sound after i adjust again |
|
