I need some help on valve adjustment video inside thanks! By roadwolf (Read 1,564 times)

[elcamino121]

If the sound wasn't there before you adjusted the valves, it's not likely a bearing.

[bonbhead]

Jun 1, 2017 4:44:05 GMT -6 roadwolf said:

May 31, 2017 20:01:35 GMT -6 bonbhead said:

I imagine so guy. It would be a good idea to put the cover back on so u don't sling oil out. Put on bolt on bottom left and top right. just snug them up.

I hope I am wrong but if that is not it a It may be a I hope I am wrong but that what it kind of sounds like the more you listen to it.

i hope not it only has 1400 miles the sound only happened right after adjust before she would purrr but would have trouble staying on and i found that the adjustment was super tight the rocker would not even move a little on tdc will post a video of sound after i adjust again

I really hope elcamino's post is what you got going on. With only 1400 mile on it it's probably a valve adjustment.

Follow the prior instructions on the valve adjustment do some research on the gy6 settings either 3,4/000. Keep us Posted.

[roadwolf]

May 31, 2017 20:01:35 GMT -6 bonbhead said:

May 31, 2017 18:23:40 GMT -6 roadwolf said:

Thanks ill try that can i turn it on with only two screws in the valve cover just to hear it sound for a couple secs and redo if i must?

I imagine so guy. It would be a good idea to put the cover back on so u don't sling oil out. Put on bolt on bottom left and top right. just snug them up.

I hope I am wrong but if that is not it a

valve adjustment

It may be a

bearing knock

I hope I am wrong but that what it kind of sounds like the more you listen to it.

[roadwolf]

hows it sound now? .004 in .003 out  tried .004 on both and it was loud on tick not clanky but it was to loud. Is this to tight? it doesn't turn off turns right on. thanks again you all!

[bonbhead]

Jun 1, 2017 16:20:44 GMT -6 roadwolf said:

Very Good. I'm going to do a experiment and set my intake at .005 and exhaust at .006. I was told by a parts dealer that I may get more power that way.

see, it wasn't hard and you didnt act like a bonehead on it.

hows it sound now? .004 in .003 out  tried .004 on both and it was loud on tick not clanky but it was to loud. Is this to tight? it doesn't turn off turns right on. thanks again you all

[roadwolf]

please let me know how that works out for you. If it is better I might just give it a try as well. Thanks again!