I have a blue one and a black one. The blue one has a 63mm BBK build with a bunch of other mods. I actually just recently finished it. So far I've hit 72mph on my GPS speedometer then I had to slow down bc a car was I front of me . I'm concerned about engine Temps, I already hit 210 degree oil Temps. My stock ran about 170-190 degrees . I have an oil cooler so I'm prob going g to have to install it.
I took the plastic piece off. I think the kickstart shaft is stopping it. I am thinking about cutting the foot peg off, then the cover will be in position to just pull straight out/off. I can always get it welded back. I just need a hacksaw now. It is easier to that than to remove the engine mount bolt and shock. If you, are anyone else finds out another way, please reply. Thanks in return. I love your modification! I am afraid to install that alternative, in that someone could gain access to the belt and cut it, or too much exposed to the weather (rain). What is the weight/sliders are the rollers you are using, as well as the clutch springs? Also, what size belt are you using? I live in a hilly part of the county. I cruise at 45mph max, sometimes 50mph.