|
Post by royldoc on Feb 21, 2011 1:47:15 GMT -6
I installed a Koso RS Digital Dyno on the trike today. Here is a photo of the dash. It vibrates a lot so gonna have to modify the mount. Roy
|
|
Clinician
Currently Offline
Posts: 15
Likes: 1
Joined: Jul 9, 2011 10:47:02 GMT -6
|
Post by wolfhound on Feb 21, 2011 5:30:37 GMT -6
Where did you get it, how do you install it, and what did it cost?
|
|
|
Post by royldoc on Feb 21, 2011 11:21:44 GMT -6
hey, wolfhound. I have had this for some time on another scooter. I got it from Enviromoto and if I remember right it was $289 dollars.I also got the spark plug temp. sensor for about $14 dollars. The install is fairly simple. I bent an L bracket then drilled new holes to match the meter. I secured the bracket to scooter with two screws. I also used 1/8" foam behind bracket for anti-vibration. It still vibrates considerably an will modify the mount later. Here is a photo of the mount. Roy
|
|
Senior Clinician
Currently Offline
Past Donor - Renew
Posts: 139
Likes: 0
Joined: Sept 24, 2010 18:30:20 GMT -6
|
Post by workdog95 on Feb 21, 2011 11:40:37 GMT -6
Looks great!
|
|
Clinician
Currently Offline
Posts: 15
Likes: 1
Joined: Jul 9, 2011 10:47:02 GMT -6
|
Post by wolfhound on Feb 21, 2011 18:21:09 GMT -6
Nice!!!
|
|
Scooter Doc
Currently Offline
Posts: 597
Likes: 0
Joined: Jan 10, 2011 11:54:02 GMT -6
|
Post by mcalli on Feb 25, 2011 15:01:14 GMT -6
OK, my stupidity is showing and I don't mind a bit cause I know I can count on one of you to tell me. WHat the heck is a digital dyno?
|
|
|
Post by royldoc on Feb 25, 2011 23:55:12 GMT -6
It's ok MC. I should have gave a description in my earlier post. Basically it is a digital dash with tachometer,speedometer,fuel gauge, temp. sensors and various other functions.
Roy
|
|