Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on Jan 26, 2012 17:55:14 GMT -6
I want to check my roller weights  are they marked as to what grams they are? Attachments:
|
|
Scooter Doc
Currently Offline
2008 Roketa MC-74-150cc & 82' Honda CM 250 Custom
Posts: 491
Likes: 1
Joined: Nov 26, 2011 21:17:27 GMT -6
|
Post by bcgreatness on Jan 26, 2012 17:57:46 GMT -6
if they are cheap like mine, then you will have to weigh them. the stock ones usually arent marked or if they had a marking chances are they are worn off.
|
|
Senior Clinician
Currently Offline
Posts: 216
Likes: 0
Joined: Jan 20, 2012 11:06:26 GMT -6
|
Post by beachbum on Jan 26, 2012 17:58:20 GMT -6
Diddo to bc's response.
|
|
Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on Jan 26, 2012 19:06:55 GMT -6
bcgreatness and beachbum, (thanks:) I want to check and clean cvt before spring, got to get ready to scoot.
|
|
Scooter Doc
Currently Offline
2008 Roketa MC-74-150cc & 82' Honda CM 250 Custom
Posts: 491
Likes: 1
Joined: Nov 26, 2011 21:17:27 GMT -6
|
Post by bcgreatness on Jan 26, 2012 21:57:37 GMT -6
yeah gotta get your scoot on lol. i ride nearly every day. a roller weight mod is my next upgrade too. let us know how it goes and dont forget, post some pics! even if we all know how to change our roller weights, take progress pics.
|
|
Scooter Doc
Currently Offline
Live To Ride / Ride To Live
Posts: 620
Likes: 0
Joined: Jun 1, 2011 10:43:34 GMT -6
|
Post by richardthescooter2 on Jan 27, 2012 10:09:55 GMT -6
ok, well do.
|
|
Clinician
Currently Offline
Posts: 30
Likes: 0
Joined: Jan 10, 2012 22:10:28 GMT -6
|
Post by roboscoot on Jan 27, 2012 11:54:57 GMT -6
i would do a little research..first......lots of videos out there that explain rollers what they can and can't do to improve the performance of your ride....just where on the throttle you are looking for more power...etc......check out dr. pulley.....
|
|
Senior Clinician
Currently Offline
Posts: 216
Likes: 0
Joined: Jan 20, 2012 11:06:26 GMT -6
|
Post by beachbum on Jan 27, 2012 12:10:31 GMT -6
Here is a link to another forum/thread that really explains alot about variator weights. scootdawg.proboards.com/index.cgi....ay&thread=38910 Well, I tried it twice and for some reason you cannot link from this forum to the other forum. It is written by "lefty" and is one of the best write-ups for understanding the variator, weights, and their performance. |
|
Scooter Doc
Currently Offline
2008 Roketa MC-74-150cc & 82' Honda CM 250 Custom
Posts: 491
Likes: 1
Joined: Nov 26, 2011 21:17:27 GMT -6
|
Post by bcgreatness on Jan 27, 2012 12:10:35 GMT -6
dr.pully is out of my price range. was just looking to get a new kevlar belt and a few heavier rollers. belt just because its been almost 3K miles on the stock one, dont feel like getting stuck on side of the road lol. rollers because i just want a more comfortable top end, dont want to take off fast, dont care about getting up to speed slow. just want to cruise at about 50-55 at 7000-7500 rpms.
|
|
Senior Clinician
Currently Offline
Posts: 216
Likes: 0
Joined: Jan 20, 2012 11:06:26 GMT -6
|
Post by beachbum on Jan 27, 2012 12:21:10 GMT -6
Try and look at that thread if you can. It was really informative. IMO
|
|
|
|
Post by Alleyoop on Jan 27, 2012 12:36:46 GMT -6
Here is a Video on how to change your weights, your variator may have a cover on the back of it. If it does it usually means there is grease in there and the cover is to keep the grease from squirting out all over the place and cause slipping. Alleyoop   |
|
are they marked as to what grams they are?
..BAD TO THE BONE..