Slider weights By bluesberl (Read 2,670 times)

[mself52]

Belt is 842 gates power link from parts for scooters.....I came home removed the carb it was spotless reinstalled it and removed all vaccum hoses and put new 3/16 hoses and bam fixed!!! John you were right when we talked on the phone lol

[mself52]

It is very hard to get the belt on tho I may need that 846 after all john so I guess put it in my shipment this Friday

[tvnacman]

You should be removing the variator to get the belt on and off , not forcing it over the pulleys . You take a chance of the rollers falling out of place when you force the belt over .

John

[mself52]

Good to know......I will test drive when it stops raining but I reved a lot and no problems

[Alleyoop]

Great News myself52, you found the problem and are up and running.
So to help others with a similiar problem WHAT was it that was causeing the problem.
Alleyoop

[mself52]

vaccum leak on the hose that runs from petcock to top right side of carb .....idle was fine but reving pulled in too much air causing no fuel from carb ... $2.49 cents for 2ft of 3/16 auto fuel line that i bought a month ago and was too lazy to install could of saved me a 3mile push and multiple hours of my life

[Alleyoop]

AH, the ACV Vacuum hose, good fine
Alleyoop

[mself52]

Thanks again for all your help