clutch and variator advice By bo (Read 1,896 times)

[bo]

alley do you remember sending me that personal email explaneing the weights-rollers-sliders well today i thought would be a good day to see what behind that big piece of alum. since i rode all day yesterday and it would not take off from a red lite. it was like the old woman driving my stick shift truck she rides the clutch a mile before she lets it all the way out..i had to take off easy it was trying to slip. get it rolling it was ok. let off it held back till i got 15mph then it started to free wheel.i took the variator off found 2 rollers out of place.so i guess i found my problem.i weighed the rollers they were 14 grams and you said it took 20x12.before i order 15 wt. im going to put it back togather and see how it runs. my ? is grease to use. iv got moly-white litu-and chain lub.which one to use?--now the clutch on the back is not seten good only in the front and middle .was going to take a bastard file and file the hump in the middle of the shoes down or try it what do you think.you may have a better way of doing it bo

[Alleyoop]

I would clean it out and use a little of the white lithium on the rollers. When I check the clutch I just rough up the glazed areas. I use a piece of sandpaper but a file will also do the job.
Alleyoop

[tvnacman]

Al I spoke to Bo earler this evening . I suggested he clean it up lube . Then go for a ride . Then take it from there .

John

[Alleyoop]

Why not just post it would of saved me some typing.
Alleyoop

[richardthescooter2]

I was always told not to grease those roller weights on the linhia/yamaha clone scooters, I was told just put some grease on the center boss and tiny amount on the side plate guides. I know some cfmoto scoot do grease thier roller. (just wondering)

[richardthescooter2]

Thank alleyoop, (finally got my 3 way plugs, working on scoot tonight)

[bo]

glad you got lights fix now you can see where you are going lol.i put variator back on going to leave those 14 grm rollers in there.
i took the clutch off .going to take the bell to the shop an take .002 out of where the shoes catch its got a low spot in it the shoes are not seating flat.it not gitting a good bit also the shoes are sticking out from under the bell so im going to mill about .020 of of the spline housing on back side so bell will go down more and see what happen got to have a better bit on clutch it slip the way it is sooo see what happens bo

[richardthescooter2]

Thanks Bo, looks like your getting there, let us know how it works when its back together.

[bo]

got machine work done look real good now if it only work.richard if you have to every take youre clutch apart the big nut for linhia is a 1/ 13/16in 12 point socket fit real tight wont round the nut off bo

[tvnacman]

did you you go for a ride ?

John

[richardthescooter2]

Bo, thanks for the info,

[bo]

no john i havent went on a ride yet.i put it back togather the way it came stock except smooth out the bell where the clutch seats that sopose smooth flat surface had high and low places in it took out .010 th git near smooth was afraidd to go any father may have mess it up .i had to have anoyher one anyway so what the heck it might work .im waiting for a new belt itt will be here mon.then its going to rain for 3 days soooo ill git to try it out someday maybe .let all know when i ride it bo

[bo]

didnt wait on new belt --put it back to gather today 66 deg.it work purfect better than new put it in the barn---after 2hrs of cranking got lawnmower started and took it to the shop grass is high --crappie are biting real good---all way something to take the pleasure out of life bo

[tvnacman]

Great !!!! what is even better is you kept us in the loop and posting an update .

John

[richardthescooter2]

Bo, glad to hear that your scoot is working good.