|
|
Post by Alleyoop on Aug 20, 2013 15:37:53 GMT -6
I gave you the measurements in my post right above and the LINK to the belt. You can find that size belt just about anywhere.
856-23-30
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 20, 2013 17:45:16 GMT -6
OHH sorry,, thought you were giving an example... BUT THANKS!!
Now lets get real.... say my belt is stretched... Would it be causing the problems i have going on? I dont wanna replace it if its not the problem.. ya know?
|
|
|
|
Post by Alleyoop on Aug 20, 2013 20:36:39 GMT -6
Well you see it bouncing so it is already a bad belt STRETCHED or the wrong size.
No guarantees bud, you still haven't checked the compression which I believe is low and the motor is not making enough power to pull a heavy load, since it will rev high on the centerstand but not with a load. I would say your compression is lower than 150 probably around 130 or so. Listening to the motor it does not sound like it has a lot of power when you twist the throttle.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 20, 2013 21:38:55 GMT -6
Thats acceptable... I appreciate all the help... will get back with ya in a couple weeks on compression.. THANKS
|
|
|
|
Post by Alleyoop on Aug 20, 2013 21:51:12 GMT -6
Couple of weeks!! It takes 5 minutes to check compression. If your going to own a scooter just go and get a compression gauge they are not expensive at all. Just get one that will fit your motor, Take a spare spark plug with you and check the threads on the compression guage hose that screws in just like your plug.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 20, 2013 22:11:41 GMT -6
When yur broke yur broke man
|
|
|
|
Post by Alleyoop on Aug 20, 2013 22:21:13 GMT -6
Ah ok, well I hope it works out in about 2 weeks.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 22, 2013 10:48:48 GMT -6
I thought while I was waiting for some dough... I would measure my belt... pic below is what it measures at.... Either this belt is REALLY stretched or I got an incorrect number from yall... It is 23 wide btw  Lemme know what you think |
|
|
|
Post by Alleyoop on Aug 22, 2013 11:16:09 GMT -6
Ok, that belt is TO LONG, an 856 belt is 33 3/4 long, which by the way I have told you and I do not think ANYONE on here told you to get a different size other than and 856-23-30 belt.
The belt you are showing us IS TO LONG 3/4 of an INCH TO LONG.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 22, 2013 12:01:19 GMT -6
Correct.. do u think it stretched that far? Is that even possible? Would too long of a belt cause it to perform like it is?
|
|
|
|
Post by Alleyoop on Aug 22, 2013 12:17:50 GMT -6
I do not think it stretched that long, I think the previous owner put on that belt or got the wrong belt.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 22, 2013 12:18:52 GMT -6
Nobody had ever taken the CVT apart before i got it... I was the first...
|
|
|
|
Post by Alleyoop on Aug 22, 2013 12:25:15 GMT -6
Did you buy it NEW or used??? If NEW then the factory slapped on whatever belt they had handy, they do that when they run out of the right parts.
Alleyoop
|
|
Scooter Doc
Currently Offline
Posts: 408
Likes: 0
Joined: May 19, 2013 21:37:59 GMT -6
|
Post by jenningsjosh on Aug 22, 2013 12:32:29 GMT -6
I can agree to that... I bought it used with 600 miles on it... But still yet... The problem i am having occurred after I had it for about a month and rode for about 500-600 miles... then it happened....
|
|
|
|
Post by Alleyoop on Aug 22, 2013 12:50:23 GMT -6
Sure pretty new belt and cheap belts will do that.
Alleyoop
|
|
..BAD TO THE BONE..
