shrouded By hellspigeon (Read 275 times)

[hellspigeon]

so I found some time last week to put the shrouds on my motor and fan cover too. I thought I was gonna have to buy some, but turns out they were in a box of parts that I got from the previous owner. I don't know why he didn't have them on before. A quick trip to home depot and a couple bucks later for some screws I was able to put the covers back on. And not with out a little Loctite, Im kinda paranoid that everything is going to vibrate off the scoot. Also I put a fuel filter on it. After a week of riding it around I realized it didn't have one. Not sure if it needed one, but it seemed like a good idea especially since it costed me like 4 bucks from autozone which included some decent fuel line. I also ordered a K & N air filter which should come in this week. Hopefully I can do that this weekend and look at the headlight as well.

[markwb]

Looks good!

[kz1000st]

That's a slide/needle carburetor with a manual choke. How do you get at that to start it without opening the seat all the time?

[twowheeler]

Nice going!

[sitticuss]

sweet ride.....nice to see someone else who is paranoid

[FrankenMech]

Nice work! Keep digging in that box. You may even find fasteners if it is like my extra parts box. They may be in a container or just loose in the box. Good luck!

[hellspigeon]

Nov 22, 2013 6:46:24 GMT -6 kz1000st said:

That's a slide/needle carburetor with a manual choke. How do you get at that to start it without opening the seat all the time?

yeah it's kind of a b!@ch to get to the choke. I could open the seat everytime I start the scoot up which isn't too bad considering I cut a majority of the plastic away from underneath my seat to accommodate the fuel line and throttle cable, but usually I just reach underneath my scoot. Sometimes I gotta feel around for the choke but not biggie.