Clinician
Currently Offline
Posts: 44 
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Dec 30, 2014 21:50:45 GMT -6
Any special tools required to get to the rollers?
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 28, 2014 12:45:17 GMT -6
My scooter came with this engine. I haven't had much time to ride it yet.
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 27, 2014 7:12:31 GMT -6
How did you know what size rollers you had?
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Odometer
by: t84a - Nov 13, 2014 15:31:53 GMT -6
Post by t84a on Nov 13, 2014 15:31:53 GMT -6
So with my Chinese scooter, the speedo is KPH and MPH like I'm sure most others. However, I'm pretty sure my odometer is in kilometers as I'm racking up digits too fast for miles. Is there a way to correct this. I mean, like replace a gear or something?
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 9, 2014 7:16:50 GMT -6
Not sure what size I used but my cap is under my seat so I'm no ttoo concerned with water.
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 7, 2014 15:13:45 GMT -6
It will run all day without the gas cap so it has to be a clogged or bad cap.
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 7, 2014 13:07:38 GMT -6
So I'm still trying to sort out my new scooter and here's my latest issue. The thing cuts out after about 2 minutes. You can tell its fueling because you can smell it lean out. Suspecting vapor lock, I opened the cap and put it back on and it started right back up. Rinse and repeat. The cap is not vented but I believe the device pictured below does the venting. Can anyone shed some light on my issue. Its a GY6 169cc. Thanks  |
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 6, 2014 13:52:26 GMT -6
I don't have any of that stuff. Just a 169 cc motor.
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 6, 2014 9:06:58 GMT -6
Thanks. I just sent them an email. I'll report back.
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 6, 2014 7:35:06 GMT -6
My new scooter has a 161QMK GY6 engine. Its 169cc. I can find no places that know anything about this engine so I can't buy perforfance parts. I have contacted most of the supporting vendors here with no success. Any other recommendations? Thanks
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 4, 2014 16:38:56 GMT -6
Seriously? If so, that would explain why I had no clue. Thanks
|
|
Clinician
Currently Offline
Posts: 44
Likes: 4
Joined: Nov 3, 2014 13:08:21 GMT -6
|
Post by t84a on Nov 4, 2014 15:51:57 GMT -6
Hi folks. Newbie here with a new scoot. Can someone tell me what this is?  |
|
