Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Apr 7, 2012 14:14:52 GMT -6
Ok, big problem solved, I hope. I ordered the wrong size bbk. So, I'm returning it, & just getting a 150cc ring set. Should be gear soon. The thought & cost tobore out case, too much. Need to save $, not spend it.
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Apr 4, 2012 19:38:55 GMT -6
What is involved in boring out case
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Apr 3, 2012 4:28:59 GMT -6
Never done ring job. The bbk is supposed to be for the 150cc to whatever size a 63mm cylinder gives you. Just found out it's like a 178cc. That seems good.
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 31, 2012 18:00:56 GMT -6
I hope there are instructions
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 31, 2012 15:29:21 GMT -6
Why gasket spray, I didn't use for head replacement
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 31, 2012 14:54:01 GMT -6
Just need torque wrench
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 31, 2012 7:50:53 GMT -6
Ordered big bore kit. Scooter Big Bore Kit 72cc GY6 QMB139 Four Stroke. 72cc GY6 QMB139 Four Stroke Big Bore Kit 72cc 47mm Increase Power by up to 30% and torque by up to 50% Each kit includes: Milled Cylinder Emissions style Head with 18mm intake 16mm exhaust and high performance springs Cylinder, piston, piston rings, piston pin, and clips Top end gaskets Performance Camshaft (not shown but is included) with 4.75mm intake stroke 4.55 exhaust and 123 degree lift angle. It has same emissions attachments mine has already too. I'm going I'll be ok putting this on. Tools needed?
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 31, 2012 7:30:36 GMT -6
It isn't the key. The pressure/finger test didn't go so well. The scooter couldn't push my finger out of the way at all, bit of pressure, but not much. So big bore kit. Any thoughts on that?
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 30, 2012 22:23:57 GMT -6
I hope the key did move, but I'm real sure it didn't move, I'll have wife help with checking compression, again.
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 30, 2012 19:03:45 GMT -6
Trying that tomorrow too
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 30, 2012 10:24:32 GMT -6
Waaaaah
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 30, 2012 9:30:38 GMT -6
I don't have an impact. Nor the tension strap wrench |
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 29, 2012 5:31:26 GMT -6
Ok just waiting got time off
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 28, 2012 9:28:49 GMT -6
Please, I really don't know anything. I don't know what to look for. I'm lost.
|
|
Scooter Doc
Currently Offline
Posts: 553
Likes: 2
Joined: Aug 13, 2011 20:21:06 GMT -6
|
Post by seanstr on Mar 27, 2012 17:59:16 GMT -6
So you think it's something else, why
|
|
