Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Dec 19, 2013 21:26:59 GMT -6
k so heres the update, the scooter is sending 15 volts to the battery without the headlight on @3k rpm. I did not do any other voltage tests because i was in a hurry, I figure it drops to a safer number once the 37watt headlight is turned on. It has been driven the past 5 days without any issues, so I am pleased, thanks everyone that helped.
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Dec 16, 2013 13:40:08 GMT -6
If sat for a while, maybe a carb cleaning?
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Dec 12, 2013 22:18:26 GMT -6
so now its just scoot A with a dc wiring, with a broke 12 pole stator. I switched in the 11 pole minus the black/red magneto. Ill have to wait til tomorrow to start and I will update yall. it ran when I had it wired to the 8 pole, it just did not charge enough, and hopefully this will give enough charge. here is the pic of old stator for tvnacman. If you look at top left of stator, you can see the cut wire.  |
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Dec 12, 2013 20:11:28 GMT -6
K bashan I lied on accident. It was a 12pole 3phase original. But now I have 11 pole, I will connect it like you said without the magneto black red and let u know. Ac Man I will post pic of for ya
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Dec 11, 2013 23:14:01 GMT -6
oh and the original stator on the ac(wired) was 8 pole. the Dc Wired scoot is the 11 pole, and I had to order the flywheel puller. p.s. Thanks bashan for the knowledge bomb, i was googling and turning up nothing as clear as this.  |
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Dec 11, 2013 23:11:13 GMT -6
Im sorry I took so long to reply,but here it is, thx for the info, docs, I had an 11 pole 3 phase stator,(three yellow wires)and it is no good anymore(some wire got physically cut).Today I was finally able to buy a new 11 pole stator. But....its not 3 phase??? heres a pic. can I not use this one. besides wire color, it looks the same as a 3 phase  |
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Nov 27, 2013 11:00:15 GMT -6
Im unsure, I could not get stator off. what if I kept the ac stator with the Ac scoot? Would that work?
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Nov 26, 2013 18:56:33 GMT -6
Hey all, lets say I have two scoots, scooter A is 150gy6 with DC cdi. Scooter B is 150gy6 with AC cdi. Can i swap motor/stator A into Scooter B with no issue?
I did this and it ran but, I dont think I wired the stator correctly. Stator wires for scooter B are 3 yellow and green(ground). Did not know how correctly. Ill let yall know more and progress develops, its just too cold for working on it right now.
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Sept 4, 2013 18:07:57 GMT -6
lol @ bashan
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Sept 4, 2013 17:38:22 GMT -6
I would love to get a cbr 150r. I would sell my truck this instant if it were in the states! all we have is the grom?!  ! |
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Sept 3, 2013 20:59:18 GMT -6
lol
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Sept 3, 2013 11:21:39 GMT -6
Cool attempt. To get a cleaner look, I would cut the black tip shorter, and try to get the chrome tip as close to the muffler as possible.
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Sept 1, 2013 18:20:13 GMT -6
I cleaned the carb today, the pilot jet was junked up. I also removed the auto-choke. The rpms no longer jump like they used too.
So Im left with only two issues.
2. Several days after that, the headlights stopped working. One time while riding at night I noticed my headlights were not working. I left it at a friends since my house was 30 minutes away. The next day I drove it home and noticed that they had started working again! The day after that they went out permanently. I have two headlights and two running lights. the running lights work. and I tested the headlight with a different hot wire and they do work. so I believe that problem could be traced to a black box(relay?) on the handlebars with 4 pins. One black, one green, one dark green, and one yellow.
3. Several days after the second issue, my rpm gauge messed up and even when im at 7k motor rpms, the the gauge only will go up to 3500rpm. Possible electrical issue there???
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Sept 1, 2013 11:06:32 GMT -6
This piece I found behind the speedometer. do you sell replacements?
|
|
Clinician
Currently Offline
Posts: 42
Likes: 0
Joined: Feb 3, 2013 0:22:59 GMT -6
|
Post by epyon96r on Aug 31, 2013 20:32:32 GMT -6
Ok mr. John, Im sorry I took the photos and measurements. but it wasnt my regulator that was bad, I had rigged my lights and that was causing the lack of charge. but I do believe I need this part for my lights if you have it?  |
|
! 