Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 31, 2013 6:00:38 GMT -6
i unpluged it on my wifes bike
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 31, 2013 5:58:21 GMT -6
that what i was thinking maybe people would hear me if they didn't see me, but anyways i gutted my muf louder but not to loud and i think it runs alittle better.
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 30, 2013 5:31:40 GMT -6
whats that going to sound like. I ride ride the ugly little thing daily i dont want to get stop I ride it like it's still a 50 (no tags)
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 30, 2013 5:08:09 GMT -6
i have kind of a rat rod scooter its a 50 frame with a 150 tank engine and lond case. I would like to make it louder without spending much cash.I don't think you can can just cut off the muffler due to needed back pressure any ideas. I ride this bike daily.
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 30, 2013 4:23:50 GMT -6
sounds like its time to talk her into a new bike.  |
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 29, 2013 17:32:10 GMT -6
hey guys i need some ideas on how to make my wife 08 baja sc50 faster .The 35 it does now just ain't cutting it.I'm running at 1/8 throttle on my 150 for her to just up with me ,I know it 's not going to be a speed demon but i could go a little faster.
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 27, 2013 4:23:57 GMT -6
That is GREAT GOOD JOB: If the rpms are going up and down at IDLE it is LEAN. To adjust the Fuel Ratio Mixture you want to start it LET IT WARM up at least 5 minutes. Then Turn the FUEL RATIO SCREW 1/4 counter clockwise and see if the IDLE GOES UP. If it does REPEAT the 1/4 turns UNTIL the idle does NOT GO UP then turn it CLOCKWISE 1/8 turn. If after you get the HIGHEST IDLE from the adjustment the REAR WHEEL IS SPINNING turn the IDLE down USING THE IDLE SPEED SCREW. That is the screw on the THROTTLE SIDE with the SPRING UNDER IT. Turn that a little COUNTER CLOCKWISE so your REAR WHEEL is NOT SPINNING. You just want the REAR WHEEL wanting to turn or turn very very slowly. The Valve adjustment will help starting it cold plus adjusting the Fuel Mixture will also help for easier starts. Alleyoop very helpfull to all us newbies |
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 27, 2013 4:20:55 GMT -6
you can buy from them on amazon.I got my front tire that way ,cost was the same and tire was on my porch the next day.
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 20, 2013 18:38:03 GMT -6
wouldn't know people that had mullets scare me. lol
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 20, 2013 4:36:22 GMT -6
Hey everyone I'm new to scooters and it has been15 years since I've been on a bike.I have lots of questions. Thanks for being here.
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 18, 2013 18:29:52 GMT -6
that thing is b.a.
|
|
Clinician
Currently Offline
Posts: 27
Likes: 0
Joined: Aug 18, 2013 18:16:26 GMT -6
|
Post by mudmobster on Aug 18, 2013 18:22:15 GMT -6
hey guys I'm new to the whole scooter thing and I was thinking about skeletoning my scoot .I've got a 2004 onni 50cc body with an 06 tank 150 engine and swing arm .pics and help would be great.
thanks Mike
|
|
