Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 27, 2014 18:28:48 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 26, 2014 23:28:42 GMT -6
 Hi Alley It did come with a frame kit for a GY6 that bolted to the top engine mount which definitely would not work so I ended cutting it all up using what I could I haven't really got to ride it due to my forgetting of where hoses go after I see it's up to my par and working like it should I'll be breaking out the welder adding more bracing I agree with you I don't like the setup to well myself I will have to figure out some movable bracing for it I just went by some pictures that TC had posted I just wish I could still do high frequency welding for aluminum without screwing up my defibrillator / pacemaker I could do more bracing on the aluminum but I can just sneak pass my wife using tig letting her think its ok (Shoooooooo) Thanks for the reply just thanking about it the axle and engine gets its movement from the shocks kinda working like a swing arm
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 26, 2014 22:51:53 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 26, 2014 22:20:54 GMT -6
Richardv For what time I road it today it seems to handle real nice that is about as close as I could get it to my spline without a lot more of modification keep In mind this is a (kit) it will not look like a manufactured trike like I said above the trike axle starts close to the spot where the rear tire ended also I even raised my engine about an 1½" going by the shock which makes the backend higher the reason for that is to keep it from pushing the scooter into corners instead of turning I really don't know what it's going to look like until I put the plastic back on it if I don't like the look after that my cutting torch is still ready to go work again but I don't think I can move it to much further inward toward the spline everyone has to keep in mind I had very little instruction to go by so this is my own and first setup so hope it will look all right Thanks for your comment  |
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 25, 2014 23:11:37 GMT -6
know what you're talking about I didn't know for sure if you could bleed them like on a car
also use to take a bottle with brake fluid in it with a hose on the bleed valve and pump them to where no air bubbles appear
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 25, 2014 22:31:42 GMT -6
Hi Bashan Hope they will be useful Also I posted some of my work on the trike forum I have been doing to my scooter if you would like to see that too Forgot to ask how is the best way to bleed the rear brake after adding a longer line?  ? I have 2 lines both being about 5/16 ID looking at the 2nd picture on the site you sent about where the fuel pump is but on the frame on my scooter is a canister it has a small line that runs to the gas tank and a big line (that I don't remember where it goes) there is a [T-for three lines] on top of the cylinder head and I don’t remember if it takes the one from canister or the other one not for sure where it's coming from at this moment if I can't figure it out I will see if I can take pictures of them and post them (((I'M NOW READY TO TEST DRIVE MY NEW TRIKE)))) once I figure out those two lines |
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 25, 2014 21:25:39 GMT -6
Has anyone have the Vacuum and Emission routing diagrams for the newest honda helix 250cc ( MC-13-250)
 ""Know what else would be cool (but may cause the forum admin "and his helpers" a big headache) so here it is""
Think it would be nice to know what scooters that use the same engines like the Honda Helix engine and the GY ect. just because some posted manuals are in a lot better quality than others   |
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 25, 2014 20:41:53 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 22, 2014 19:37:53 GMT -6
Hi Alleyoop  Took quite awhile I've been trying since last march but let me tell you i guess they sell like hot cakes to me its worth the wait its a whole new axle type being a little headache to install with really no good pattern to go by got the back tires true to the front tire now i just need to get the spline sprocket in line with the axle sprocket I'll be breaking out the heavy-duty super glue ((((( YE-HA )))) |
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 21, 2014 0:47:10 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 16, 2014 21:26:59 GMT -6
Thanks
Hope your getting the manuals you and everyone can use
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 16, 2014 21:15:17 GMT -6
Sorry about the trouble question above after looking and working on my design I didn't like it very well so I'm tearing back down and try a different approach at it may work better if you still wanted to know my engine its the Honda Helix 250cc soon be trike if health and weather is in my favor  By the way Bashan another 3GB DVD heading in your direction I'm not real sure but some you may already have (((( I don't know what to do with them pistons there to small for my engine LOL)))
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
Post by robertban on Sept 14, 2014 21:22:27 GMT -6
I need some help I got to do away with the breather assy. On the side of my 2013 jonway mc-13-250 I would like to go from the carb and drop down toward the radiator (maybe a radiator) hose with what kind of breather? also not real sure I think there is 2 vacuum hoses to so would anyone know of a small but good breather in a casing that may work also if I needed I could braze fittings for the vacuum hoses
|
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
BASHAN
by: robertban - Sept 10, 2014 18:54:44 GMT -6
Post by robertban on Sept 10, 2014 18:54:44 GMT -6
Hopefully once Bashan goes throw them all everyone will get some use out of them Thanks everyone for the reply's YE-HA my trike kit is to be delivered tomorrow from treasurecoast can't wait to get it installed |
|
Certified Clinician
Currently Offline
Posts: 67
Likes: 0
Joined: Oct 9, 2013 20:52:00 GMT -6
|
BASHAN
by: robertban - Sept 4, 2014 14:45:46 GMT -6
Post by robertban on Sept 4, 2014 14:45:46 GMT -6
I'm sending Bashan around 6gb worth of manuals it could very will be there i thank Bashan gonna get a big headache seeing all of these manuals
|
|
Hi Alley
[/URL
[/URL
[/URL
[/URL
