|
|
Post by royldoc on Apr 28, 2013 9:25:25 GMT -6
Hello, and welcome. This is were the engine code is at.  Jim is our go to guy for Icebear parts, and he pretty much covered it all. Can you post any photo's? We like photo's and they will help us help you. Roy |
|
|
|
Post by royldoc on Apr 27, 2013 0:04:24 GMT -6
A good disc brake lock with an alarm would have prevented her from coasting the scooter down hill. Locks are no guarantee though. If they want it bad enough they will take a risk to get it. Isn't it convenient that the security cameras don't work just when you need them. Glad you got it back though.
Roy
|
|
|
|
Post by royldoc on Apr 23, 2013 11:52:05 GMT -6
Ok, I went and checked it out. I don't like change. I'm kinda set in my ways. But if I have to.  Roy |
|
|
|
Camera's
by: royldoc - Apr 23, 2013 9:25:02 GMT -6
Post by royldoc on Apr 23, 2013 9:25:02 GMT -6
I have a gopro and have no issues....to me best on the market for the price. Just my opinion what model do you have? Thanks for your input. Roy |
|
|
|
Camera's
by: royldoc - Apr 22, 2013 11:51:28 GMT -6
Post by royldoc on Apr 22, 2013 11:51:28 GMT -6
I'm leaning toward the Sony Action cam.
Roy
|
|
|
|
Post by royldoc on Apr 22, 2013 0:06:30 GMT -6
Not good with E.F.I. huh?  All of my vehicles have E.F.I., except for the magnum. I installed E.F.I. on my 50cc trike and will be installing a system on the 300. Even E.F.I. systems have some sort of idle speed adjustment on them. I am not familiar with that particular system, but give me a while so I can do some research. Roy |
|
|
|
Camera's
by: royldoc - Apr 21, 2013 21:18:34 GMT -6
Post by royldoc on Apr 21, 2013 21:18:34 GMT -6
I have already researched the go cam. A lot of bad reviews stating they over heat and lock up, and some other issues. Plus they are expensive and for the cost they should not have those issues.
Roy
|
|
|
|
Post by royldoc on Apr 21, 2013 19:36:07 GMT -6
Finally converted that thing to a trike, Huh? Roy |
|
|
|
Post by royldoc on Apr 21, 2013 19:32:13 GMT -6
|
|
|
|
Camera's
by: royldoc - Apr 21, 2013 19:24:15 GMT -6
Post by royldoc on Apr 21, 2013 19:24:15 GMT -6
Mines probably older than yours. It is a cannon powershot s200 digital elf. It is only 2 mega pixels, But takes excellent photo's and about 45 sec. of video.
Roy
|
|
|
|
Camera's
by: royldoc - Apr 21, 2013 19:09:50 GMT -6
Post by royldoc on Apr 21, 2013 19:09:50 GMT -6
I am in need of a new camera as the battery in mine is about shot. I would like to be able to mount it the trikes when I ride as well as take photo's. I would like any input and advice on the kinds of cameras you all use. No phones please. Even though my phone has an excellent camera, I don't use it. It is an HTC EVO 4G.
Roy
|
|
|
|
Post by royldoc on Apr 21, 2013 19:02:49 GMT -6
I'm just busting your chops Roy . John HaHa. Its all good. I have been real busy. And will be getting ready for the season. The weather is getting better. It is going to be chilly next week though. I need to get a new camera also. The battery in mine will not last more than a few photo's or about 15 seconds of video. It is an old cannon power shot s200 digital elph and is only 2.0 mega pixels. It has been an excellent camera and takes good photo's. Time to upgrade though. I want to get one that I can also mount to the scooters. Roy Roy |
|
|
|
Post by royldoc on Apr 21, 2013 18:34:18 GMT -6
ah forget about the axle seals , work on the cdi analysis . Did your son ever come up with the LCP . John Ya,ok I'll just replace the whole rear end when the bearings run out of grease and chew up the axle tube.  Not. But ya He did finally bring over my leads. But I have been busy on several other projects, and the weather has been bad here. I'll get right on that cdi thingy though. Roy |
|
|
|
Post by royldoc on Apr 21, 2013 11:32:49 GMT -6
I'm guessing it is not a cable, but the carburetor bowl drain hose. They are sometimes protected by a spring around them and it will have a valve on the end of it to drain the carb.
Roy
|
|
|
|
Post by royldoc on Apr 21, 2013 8:42:53 GMT -6
I want to replace the rear axle seals in my 50cc trike. I thought I wrote it down last time I had I apart, But can't remember where I wrote It. Any body know how thick they are? I know the I.D. is 25mm and the O.D. is 52mm.
Roy
|
|
All of my vehicles have E.F.I., except for the magnum. I installed E.F.I. on my 50cc trike and will be installing a system on the 300. Even E.F.I. systems have some sort of idle speed adjustment on them. I am not familiar with that particular system, but give me a while so I can do some research.
Not. But ya He did finally bring over my leads. But I have been busy on several other projects, and the weather has been bad here. I'll get right on that cdi thingy though.