|
|
good deal
by: royldoc - Apr 17, 2011 16:47:17 GMT -6
Post by royldoc on Apr 17, 2011 16:47:17 GMT -6
|
|
|
|
Post by royldoc on Apr 17, 2011 15:45:02 GMT -6
Sprocket, I'm sure they are great fuel pumps. But how much pressure will the produce? electronic fuel injectors work at a higher pressure.
Roy
|
|
|
|
Post by royldoc on Apr 17, 2011 13:06:23 GMT -6
|
|
|
|
Post by royldoc on Apr 17, 2011 12:16:01 GMT -6
Here's a little trick that might work. Get a split shot sinker of appropriate size (they are used for fishing). put between end of cable and catch to take up slack and crimp. I have used this trick several times. Only problem is lead is soft and might tend to open up. you could also try a steel putty such as JB weld. Good Luck.
Roy
|
|
|
|
Post by royldoc on Apr 17, 2011 10:48:06 GMT -6
|
|
|
|
Post by royldoc on Apr 17, 2011 1:47:37 GMT -6
I've been doing a lot of searching and found that similar systems use about 60 watts. I don't know if the charging system will handle that. Also The oxygen sensor is not included and the instructions don't specify what type they use. I sent them an e-mail to inquire about this. Any way If this project fails I'll just get a bigger trike to try it on. ;D
Roy
|
|
|
|
Post by royldoc on Apr 16, 2011 11:50:21 GMT -6
forgot to ad photo.  |
|
|
|
Post by royldoc on Apr 16, 2011 11:48:42 GMT -6
The performance exhaust header pipe I got will not fit. I'll need to fabricate a new one. I'm thinking about getting a supertrap with a 2" inlet and cutting the original header at the catalytic converter. It is 2" in diameter. but I wonder if it will put the muflfer to close to the fan shroud.
Roy
|
|
|
|
Post by royldoc on Apr 16, 2011 10:18:14 GMT -6
Coffee ain't kicked in and brain is still asleep. It is an average of 5.5 watts.
Roy
|
|
|
|
Post by royldoc on Apr 16, 2011 10:01:22 GMT -6
I tested 3 chokes this morning and came up with an average of .50 watts.
Roy
|
|
|
|
Post by royldoc on Apr 16, 2011 9:57:24 GMT -6
|
|
|
|
Post by royldoc on Apr 16, 2011 2:54:08 GMT -6
Bashan, I got a solution to your problem. This is what ya do. Ya get a leg stretcher and the bergie. ;D
Roy
|
|
|
|
Post by royldoc on Apr 16, 2011 2:35:24 GMT -6
I was awakened by thunder storms and couldn't get back to sleep. So I picked up a copy of model airplane news. Radio controlled planes and helicopters is one of my other expensive hobbies. Anyway I came across an add for servo motors. then I got to thinking. I wonder If I could replace the throttle cable with a servo and driver. Now the reason I'm thinking of this is because when I changed the carburetor to a 24mm the throttle cable was not long enough and I had to modify the cable bracket and move it closer to the operating linkage. If I wouldn't of been able to do this I would have to replace the cable. If it had a servo it would have been as easy as loosening the clamp and extending the cable. Any thoughts on this?
Roy
|
|
|
|
Post by royldoc on Apr 16, 2011 0:13:26 GMT -6
How many watts does the electric choke use? I'm trying to calculate how many watts to reduce to run a fuel pump that draws 2 amps. When I install the efi system I will eliminate the choke.
Roy
|
|
|
|
Post by royldoc on Apr 15, 2011 12:45:58 GMT -6
Oh ya, forget to mention it has a JR28 pilot jet also.
Roy
|
|
